> SIDE NOTE: I am still not using the very latest firmware > release/simplemonitor. I downloaded them, but have not yet installed > them. Not sure if this is what's causing all the commotion??
I don't think it is... I didn't mean to say I thought it was a firmware problem, but that it was the storage in use in the device. The firmware seems to work great on the good units. It seems like sometimes on a bad unit you can flash a device several times, and use simple deploy on it several times and eventually, it may "take" properly and start working. Kind of like a bad floppy disk that you can't write to. I had one once where the ethernet light would not come on. I unplugged it, plugged it back in, same deal... did it about 6 times, and then it finally came on. I can say one thing for certain... I was lead to believe that a lot of the problems were "user error", but I have played with the units enough to know that some are good and some are just plain flakey and don't do what they should, and if I get a bad unit, I now know it's not because I misconfigured it. I'm also a fan of smartbridges, I think it's a fantastic product - better than any other for my use. At least when they work, anyway. Thanks, Roger The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
