I don't know the answer to that one (I am assuming that SB does not use it) but make sure that the Cisco is set to long preamble (which is short by default) so as to match the SB default of long. (or switch all SB to short, I guess)
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of shoffman Sent: Friday, June 20, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: [smartBridges] QoS on SBTotals I am using a Cisco AP350 as my AP and using the SBTotal (and some outdoors) for CPE. I am trying to fine tune the cisco to interoperate better with the SB's. One thing that Cisco has is the QoS capabilities from IEEE 802.11e. : QoS Basis Service Set (QBSS)-Based on IEEE 802.11e DRAFT version 3.3 The issue is, if I have the AP350 broadcast this info, will the SB's use it? or should I just turn that off to conserve on overhead? Thanks Scott Hoffman The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
