At the moment, we do not have Qos features on the sB devices. In future release, we will include this option together with multiple SSID support. In order to associate ABO with Cisco350 AP, please try to set the preamble to "long" and this setting automatically transmitted to ABO once associated. By default, Cisco preamble setting is "short". If you are having trouble in the association with ABO, then change to "short".
Seeni, SB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of shoffman Sent: Saturday, June 21, 2003 1:42 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] QoS on SBTotals I am using a Cisco AP350 as my AP and using the SBTotal (and some outdoors) for CPE. I am trying to fine tune the cisco to interoperate better with the SB's. One thing that Cisco has is the QoS capabilities from IEEE 802.11e. : QoS Basis Service Set (QBSS)-Based on IEEE 802.11e DRAFT version 3.3 The issue is, if I have the AP350 broadcast this info, will the SB's use it? or should I just turn that off to conserve on overhead? Thanks Scott Hoffman The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
