I have them both set to short....
Scott -----Original Message----- From: "Tom Haynes" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Fri, 20 Jun 2003 13:34:53 -0500 Subject: RE: [smartBridges] QoS on SBTotals > I don't know the answer to that one (I am assuming that SB does not use > it) but > make sure that the Cisco is set to long preamble (which is short by > default) so > as to match the SB default of long. (or switch all SB to short, I > guess) > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of shoffman > Sent: Friday, June 20, 2003 12:42 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] QoS on SBTotals > > > I am using a Cisco AP350 as my AP and using the SBTotal (and some > outdoors) for CPE. I am trying to fine tune the cisco to interoperate > better with the SB's. One thing that Cisco has is the QoS capabilities > from IEEE 802.11e. : > > QoS Basis Service Set (QBSS)-Based on IEEE 802.11e DRAFT version 3.3 > > The issue is, if I have the AP350 broadcast this info, will the SB's > use > it? or should I just turn that off to conserve on overhead? > > Thanks > Scott Hoffman > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges > <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
