Board
We are
operating off two towers
We
were using Oronoco AP1000 w/3-120 degee sectors on each
tower
We had
a terrible lightning storm moved through Monday
afternoon
Our
AP�s on the 300� tower took a hit
We
were protecting the radios with
PolyPhasers
The
lightning took the polyphasers out
The
radios are ok
This
is good, but we still had to go up 300� on the
tower
The
Trango 5.8 backhaul is located 10� above the 2.4 antennas, they are
ok
When
we went up there we replaced the Orinoco radios with smartBridges
APPO�s
We did
install shielded cable however
My
question is this, is there protection you can put on the AP�s, that if they
take a close lightning hit
That
will protect the radio but will reset after the lightning
hit
I
haven�t seen any recommendations on any lightning protection from
smartBridges, but I could have overlooked
it
Thanks
Joe
East
Texas DSL
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of smartBridges Tech
Team
Sent: Friday, June 20,
2003 7:21 PM
To:
[EMAIL PROTECTED]
Subject: RE: [smartBridges] QoS on
SBTotals
We value
your suggestion and feedback, it really makes us to improve our product better
in functionality and performance. Recently released software and firmware were
fixes the many of the issues were reported by our value added
customers.
We are
looking for your continuous support and suggestion which will help us to serve
you better in future.
Thanks
Seeni,
SB support
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of phantam
Sent: Saturday, June 21, 2003 6:18
AM
To:
=SMTP:[EMAIL PROTECTED]
Subject: RE: [smartBridges] QoS on
SBTotals
Can I
see the suggestion box so far and its status :D hehe Just Kiddin just keep us
posted on the future firmwares that freezing bugs driving my clients mad ( I
lost 1 today L )
Chris
From: Seeni
[mailto:[EMAIL PROTECTED]
Sent: Friday, June 20, 2003 4:58
PM
To:
[EMAIL PROTECTED]
Chris,
I will
check with our development team about how could be achieved with these
features on the CPE devices. I added your comments into the suggestion
box.
Seeni, SB
support
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of phantam
Sent: Saturday, June 21, 2003 4:15
AM
To:
=SMTP:[EMAIL PROTECTED]
Subject: RE: [smartBridges] QoS on
SBTotals
Seeni
could it be implemented and tested to see how the effect on performance is
done (as an optional component I mean if like myself we have solid links and
want PPPoE and don't mind a hit of 10% I would turn it on) as for VLAN's I
actually mean mac based vlans so that the client can be tagged at the ap for a
certain ap (business, home, etc) so that they can get automatically divided up
at the noc.
I love
when you respond so quick,
Seeni do
you have msn? J
Chris
From: Seeni
[mailto:[EMAIL PROTECTED]
Sent: Friday, June 20, 2003 4:12
PM
To:
[EMAIL PROTECTED]
Our
current airpoint series does support the VLAN tagging by allowing "Non-IP
traffic" option in the advanced TAB. To support with multiple SSID, our next
release version will come this features. Our Speedtrap is under development
process.
It is
a good feature to authenticate thru airbridge but it is a simple layer 2
device which may reduce the performance.
Seeni, Sb
support
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of phantam
Sent: Saturday, June 21, 2003 3:20
AM
To:
'[EMAIL PROTECTED]'
Subject: RE: [smartBridges] QoS on
SBTotals
Sounds great! Seeni I have
2 questions A. For the AP's is there any possibility of VLAN's being
implemented either on the current AP's or in the simpletraps this is something
really has over the rest and I think would be a great added feature.
B. On the Airbridges to
implement PPPoE, NO I did NOT say support I said PPPoE, as in the ability to
enter the clients username and password in simplemonitor and it will
authenticate the user. THIS WOULD BE A KICK A** Feature and would definitely
be worth it. Whats the practicality and probability of this?
This would in my vision
make both products worth their weight in gold and both would really meet that
"carrier grade" product specifications like it says on the website.
Also whats the schedule on
the firmware to bring the Airpoint up to grade with the pro's and also are we
going to get an acknowledgement of the freezing problem from the atmel chip
and a fix for it in the new version PLEASE.
Chris
-----Original
Message-----
From: Seeni [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 20, 2003 3:13
PM
To:
[EMAIL PROTECTED]
At the moment, we do not
have Qos features on the sB devices. In future
release, we will include
this option together with multiple SSID
support.
In order to associate ABO
with Cisco350 AP, please try to set the
preamble to "long" and this setting
automatically transmitted to ABO
once associated. By default, Cisco
preamble setting is "short".
If you are having trouble in the
association with ABO, then change to
"short".
Seeni, SB
support
-----Original
Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
On Behalf Of shoffman
Sent: Saturday, June 21, 2003 1:42
AM
To:
'[EMAIL PROTECTED]'
Subject: [smartBridges] QoS on
SBTotals
I am using a Cisco AP350 as
my AP and using the SBTotal (and some
outdoors) for CPE. I am trying to
fine tune the cisco to interoperate
better with the SB's. One thing
that Cisco has is the QoS capabilities
from IEEE 802.11e. :
QoS Basis Service Set
(QBSS)-Based on IEEE 802.11e DRAFT version 3.3
The issue is, if I have the
AP350 broadcast this info, will the SB's use
it? or should I just
turn that off to conserve on overhead?
Thanks
Scott
Hoffman
The PART-15.ORG
smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the
body type subscribe
smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
smartBridges)
Archives: http://198.63.203.6
The PART-15.ORG
smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the
body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe smartBridges)
Archives: http://198.63.203.6
