Here is my network setup. Me------Router------Internet-----router--(VPN Server)----COR-----aB---client PC.
The routers are Mikrotik version 2.7.2, supposed to work okay with aB. Running Masquerading, Ports are setup correctly on aB for management. Using static IP addresses. I can connect to the VPN and manage my COR,and ROR's without problems. Both routers are running RIP and know paths to each other. Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden Sent: Thursday, June 26, 2003 11:43 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] remote management using simpleMonitor Scott Damron wrote: > I have been trying to do this for months. I have a VPN connecton to > another network, still can not manage the Airbirdges. I have latest > firmware, and SImple Monitor. Just won't work. These problems are hard to debug without a drawing of your network and information about the configuration on your router(s), administration PC and airBridges. Make sure that the Primary (DHCP) port on all radios are set to the direction of the router. i.e.: VPN gateway --- aPPO ~~~ aB -- Client PC Primary port on the aPPO should be set to ethernet, and on the aB to Wireless. -- LarsG The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
