No packet filter, Yes, I can ping the Ab from VPN connection, my connection is via ethernet on my network, across the Internet to a VPN server, to my wired network on that side, then out to the wireless network at the end. The radios are all on the same subnet. All radios are managed via SNMP.
Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden Sent: Thursday, June 26, 2003 2:29 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] remote management using simpleMonitor [Can not connect to aB through VPN] Scott Damron wrote: > Here is my network setup. > > Me------Router------Internet-----router--(VPN > Server)----COR-----aB---client PC. > > The routers are Mikrotik version 2.7.2, supposed to work okay with aB. > Running Masquerading, Ports are setup correctly on aB for management. > Using static IP addresses. I can connect to the VPN and manage my > COR,and ROR's without problems. Both routers are running RIP and know > paths to each other. You have probably already checked this, but.. The COR and aB have similar configuration (i.e. both are on the same IP network with same subnet mask and default gw)? Can you ping/connect to the aB from something on the same subnet - say, from the VPN server or from a laptop connected to the COR? Are the COR/RORs managed through SNMP? If not, is there any packet filter running on Me, the two routers or the VPN Server that might block SNMP (UDP 161/162)? -- LarsG The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
