|
Yes, the very same thing here. Ch 6 slow, Ch 1 ok.
Earl UpHi.net
-------Original Message-------
Date: Friday, August 01, 2003 09:29:00 AM
Subject: Re: [smartBridges] Throughput Question [update]
I'm answering myself but assuming someone cares...
The overlapping channel issue did not solve the problem, we still only got
400k off of the second tower on channel 6. I started troubleshooting and
found that even though channel 6 was open on our SA, if we moved it to
channel 1 our throughput jumped to 2 megs with spikes to 2.5. So we left it
on channel 1.
Has anyone else noticed certain channels being inherently slower than
others?
Ray
----- Original Message -----
Sent: Thursday, July 31, 2003 3:15 PM
Subject: Re: [smartBridges] Throughput Question [update]
> Found that one of the techs had changed the APPO on tower one to channel
> 9 and we had tower two set to channel 6. Both towers can see each other
> so I changed the one from channel 9 to 11. I haven't had time to test
> the bandwidth yet but I'm crossing my fingers that that was it.
>
> Ray
>
>
>
>
>
> Ray wrote:
> > No amps in the system. The backhaul is two APPO with Maxrad 18dBi
panels.
> >
> > Ray
> >
> >
> >
> > ----- Original Message -----
> > *Sent:* Wednesday, July 30, 2003 11:03 PM
> > *Subject:* Re: [smartBridges] Throughput Question
> >
> > What type of ant's amps are you running on the backhaul did you do a
> > spectrum I bet if you went H pol if your not here already will give
> > you a LOT more I had to switch to H pol after seeing all the traffic
> > in the V pol around here! Its been awesome ever since!
> >
> > ----- Original Message -----
> > *Sent:* Wednesday, July 30, 2003 9:49 PM
> > *Subject:* [smartBridges] Throughput Question
> >
> > We just hooked our first customer up on our new POP today and
> > have 7 more to do by Friday. The tower has a SB APPO connected
> > to a 21 dBi 90deg sector and the backhaul is an APPO connected
> > to another APPO on our main tower.
> >
> > The distance is about 9 miles and we're getting 55% RSSI 80% LQ
> > (according to simple monitor). Max throughput on this link is
> > around 400k, is this all we're going to get?
> >
> > Fresnel zone is VERY clear as it's shooting across a valley.
> > The CPE is a SB ABO and a 19dBi Arc panel.
> >
> > Any ideas on the throughput?
> >
> > Thanks,
> >
> > Ray
> >
> >
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Version: 6.0.502 / Virus Database: 300 - Release Date: 7/19/2003
> >
>
>
>
> The PART-15.ORG smartBridges Discussion List
smartBridges <yournickname>
smartBridges)
>
---
Outgoing mail is certified Virus Free.
Version: 6.0.502 / Virus Database: 300 - Release Date: 7/20/2003
The PART-15.ORG smartBridges Discussion List
. | 
IncrediMail - Email has finally evolved - Click Here