I'm answering myself but assuming someone cares... The overlapping channel issue did not solve the problem, we still only got 400k off of the second tower on channel 6. I started troubleshooting and found that even though channel 6 was open on our SA, if we moved it to channel 1 our throughput jumped to 2 megs with spikes to 2.5. So we left it on channel 1.
Has anyone else noticed certain channels being inherently slower than others? Ray ----- Original Message ----- From: "Ray" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, July 31, 2003 3:15 PM Subject: Re: [smartBridges] Throughput Question [update] > Found that one of the techs had changed the APPO on tower one to channel > 9 and we had tower two set to channel 6. Both towers can see each other > so I changed the one from channel 9 to 11. I haven't had time to test > the bandwidth yet but I'm crossing my fingers that that was it. > > Ray > > > > > > Ray wrote: > > No amps in the system. The backhaul is two APPO with Maxrad 18dBi panels. > > > > Ray > > > > > > > > ----- Original Message ----- > > *From:* Blazen Wireless <mailto:[EMAIL PROTECTED]> > > *To:* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > *Sent:* Wednesday, July 30, 2003 11:03 PM > > *Subject:* Re: [smartBridges] Throughput Question > > > > What type of ant's amps are you running on the backhaul did you do a > > spectrum I bet if you went H pol if your not here already will give > > you a LOT more I had to switch to H pol after seeing all the traffic > > in the V pol around here! Its been awesome ever since! > > > > ----- Original Message ----- > > *From:* Ray <mailto:[EMAIL PROTECTED]> > > *To:* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > *Sent:* Wednesday, July 30, 2003 9:49 PM > > *Subject:* [smartBridges] Throughput Question > > > > We just hooked our first customer up on our new POP today and > > have 7 more to do by Friday. The tower has a SB APPO connected > > to a 21 dBi 90deg sector and the backhaul is an APPO connected > > to another APPO on our main tower. > > > > The distance is about 9 miles and we're getting 55% RSSI 80% LQ > > (according to simple monitor). Max throughput on this link is > > around 400k, is this all we're going to get? > > > > Fresnel zone is VERY clear as it's shooting across a valley. > > The CPE is a SB ABO and a 19dBi Arc panel. > > > > Any ideas on the throughput? > > > > Thanks, > > > > Ray > > > > > > > > > > --- > > Outgoing mail is certified Virus Free. > > Checked by AVG anti-virus system (http://www.grisoft.com). > > Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003 > > > > > > --- > > Outgoing mail is certified Virus Free. > > Checked by AVG anti-virus system (http://www.grisoft.com). > > Version: 6.0.502 / Virus Database: 300 - Release Date: 7/19/2003 > > > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 7/20/2003 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
