Re: [smartBridges] Throughput Question [update]

[Ray]

Found that one of the techs had changed the APPO on tower one to channel 
9 and we had tower two set to channel 6.  Both towers can see each other 
so I changed the one from channel 9 to 11.  I haven't had time to test 
the bandwidth yet but I'm crossing my fingers that that was it.

Ray





Ray wrote:
No amps in the system.  The backhaul is two APPO with Maxrad 18dBi panels. 
 
Ray
 
 

    ----- Original Message -----
    *From:* Blazen Wireless <mailto:[EMAIL PROTECTED]>
    *To:* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
    *Sent:* Wednesday, July 30, 2003 11:03 PM
    *Subject:* Re: [smartBridges] Throughput Question
    What type of ant's amps are you running on the backhaul did you do a
    spectrum I bet if you went H pol if your not here already will give
    you a LOT more I had to switch to H pol after seeing all the traffic
    in the V pol around here! Its been awesome ever since!
        ----- Original Message -----
        *From:* Ray <mailto:[EMAIL PROTECTED]>
        *To:* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
        *Sent:* Wednesday, July 30, 2003 9:49 PM
        *Subject:* [smartBridges] Throughput Question
        We just hooked our first customer up on our new POP today and
        have 7 more to do by Friday.  The tower has a SB APPO connected
        to a 21 dBi 90deg sector and the backhaul is an APPO connected
        to another APPO on our main tower.
         
        The distance is about 9 miles and we're getting 55% RSSI 80% LQ
        (according to simple monitor).  Max throughput on this link is
        around 400k, is this all we're going to get?
         
        Fresnel zone is VERY clear as it's shooting across a valley. 
        The CPE is a SB ABO and a 19dBi Arc panel.
         
        Any ideas on the throughput?
         
        Thanks,
         
        Ray
         
         
         

        ---
        Outgoing mail is certified Virus Free.
        Checked by AVG anti-virus system (http://www.grisoft.com).
        Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003
         

        ---
        Outgoing mail is certified Virus Free.
        Checked by AVG anti-virus system (http://www.grisoft.com).
        Version: 6.0.502 / Virus Database: 300 - Release Date: 7/19/2003


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org