Take the splitter out of the picture temporarily and test. I suspect that's going to be the issue.
Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Eric Helm > Sent: Thursday, July 31, 2003 9:04 AM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Smartbridge APPO max client associations? > > > What is the max client associations on an APPO without comprimising the > performance of the throughput? > I have 1 APPO that has 35 clients on it, and 1 APPO that has only 5 > clients... the lesser of the two can get 2 Mbps throuput, which is what we > are feeding it from the backhaul, however on the APPO with 35 clients, the > max throughput I can get is about 700 to 800 Kbps. The setup is > as follows: > 1 APPO --> .5 Watt Amp --> Splitter --> 2 - 120 degree sector antennas. > 1 APPO --> 1 - 120 degree sector antenna > > The APPO experiencing throughput problems it the one that has the splitter > on it.. could this be causing the problem? We just purchased the WISP that > setup the APPOs and I am not opposed to adding a 3rd APPO if that > would be a > viable solution, but I am concerned if 35 clients is going to hinder the > performance that much. > > Thanks, > > Eric > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
