Re: [smartBridges] Throughput Question

[Ray]

No amps in the system.  The backhaul is two APPO with Maxrad 18dBi panels.    Ray     ----- Original Message ----- From: Blazen Wireless To: [EMAIL PROTECTED] Sent: Wednesday, July 30, 2003 11:03 PM Subject: Re: [smartBridges] Throughput Question What type of ant's amps are you running on the backhaul did you do a spectrum I bet if you went H pol if your not here already will give you a LOT more I had to switch to H pol after seeing all the traffic in the V pol around here! Its been awesome ever since! ----- Original Message ----- From: Ray To: [EMAIL PROTECTED] Sent: Wednesday, July 30, 2003 9:49 PM Subject: [smartBridges] Throughput Question We just hooked our first customer up on our new POP today and have 7 more to do by Friday.  The tower has a SB APPO connected to a 21 dBi 90deg sector and the backhaul is an APPO connected to another APPO on our main tower.   The distance is about 9 miles and we're getting 55% RSSI 80% LQ (according to simple monitor).  Max throughput on this link is around 400k, is this all we're going to get?   Fresnel zone is VERY clear as it's shooting across a valley.  The CPE is a SB ABO and a 19dBi Arc panel.   Any ideas on the throughput?   Thanks,   Ray       --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003   --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 7/19/2003