Re: [smartBridges] Setup Advice Please

[Ian Ellison]

You need to change the configuration for your antenna, as it has no way 
of knowing what you've hooked up.  The TOTAL product probably isnt the 
best for what your doing, but you should be able to get it to work.  
I've only used smartBridges for AP / CPE solutions, so I cant offer any 
more advice on that.  My understanding is they are not too great for 
backhauls.  Best of luck.

Ian

Rick Kosick wrote:

I have an airBridge TOTAL and an airPoint TOTAL.

I want to create a simple backhaul and don't know which mode is best for me.

I simply want to bridge one LAN to another LAN, point to point. The distance
is about 1000'.
What is the best mode to configure this as? Reading the manual, it seems
that maybe I should be using two airPoints instead of an airPoint and an
airBridge?
Also, under the Dial-A-Power is lists my Antenna Type as being a 2.2, is
that correct?
Thanks!!
Rick
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  
 

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org