Hi Rick, No this link will work perfectly fine
Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Kosick Sent: Thursday, November 06, 2003 10:16 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Setup Advice Please Hi Vasu. The only way I could get this to work was to set to Access Point operational mode on the AP and the airBridge synch'd right up. Am I losing anything by running this way as opposed to getting two AP's instead? I only need a fast-as-possible point to point backhaul. Also, what should the antenna setting be under Dial-A-Power for the TOTAL units? === Rick Kosick StarLinX Internet Service ----- Original Message ----- From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 05, 2003 9:06 PM Subject: RE: [smartBridges] Setup Advice Please You can use the normal AP and client device, to have a link, unless you have two access points you can use in the wireless bridge mode, creating a point to point link. With Best Regards, Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Kosick Sent: Thursday, November 06, 2003 9:15 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Setup Advice Please I have an airBridge TOTAL and an airPoint TOTAL. I want to create a simple backhaul and don't know which mode is best for me. I simply want to bridge one LAN to another LAN, point to point. The distance is about 1000'. What is the best mode to configure this as? Reading the manual, it seems that maybe I should be using two airPoints instead of an airPoint and an airBridge? Also, under the Dial-A-Power is lists my Antenna Type as being a 2.2, is that correct? Thanks!! Rick The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
