Re: [smartBridges] Setup Advice Please

Rick Kunze Wed, 05 Nov 2003 19:10:39 -0800

That would be a question for Vasu. But if it's the same gut as an APPO, it won't know it's own antenna. It's academic though, as long as the power level is set to 17.5 you're at max output no matter what the antenna is. That antenna selection thing is only for the sake of calculating the full (gain) output of the combination (radio/antenna). It has no affect on the radio itself.

Rk

At 05:51 PM 11/5/2003, you wrote:

Hi Ian.

    The problem is that the TOTAL has its own built in antenna.
    It should know what's hooked up, no?
===
Rick Kosick
StarLinX Internet Service

----- Original Message -----
From: "Ian Ellison" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 05, 2003 8:46 PM
Subject: Re: [smartBridges] Setup Advice Please


> You need to change the configuration for your antenna, as it has no way
> of knowing what you've hooked up.  The TOTAL product probably isnt the
> best for what your doing, but you should be able to get it to work.
> I've only used smartBridges for AP / CPE solutions, so I cant offer any
> more advice on that.  My understanding is they are not too great for
> backhauls.  Best of luck.
>
> Ian
>
> Rick Kosick wrote:
>
> >I have an airBridge TOTAL and an airPoint TOTAL.
> >
> >I want to create a simple backhaul and don't know which mode is best for
me.
> >
> >I simply want to bridge one LAN to another LAN, point to point. The
distance
> >is about 1000'.
> >
> >What is the best mode to configure this as? Reading the manual, it seems
> >that maybe I should be using two airPoints instead of an airPoint and an
> >airBridge?
> >
> >Also, under the Dial-A-Power is lists my Antenna Type as being a 2.2, is
> >that correct?
> >
> >Thanks!!
> >Rick
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> >Archives: http://archives.part-15.org
> >
> >
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>

The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org

Re: [smartBridges] Setup Advice Please

Reply via email to