Re: [smartBridges] Setup Advice Please

[[EMAIL PROTECTED]]

The antenna setting doesn't really have any effect on the radio except to show up in the ERP calculator that is built in to Simple Monitor.  Don't worry about the antenna setting.  But if you set it to 13dB then the ERP calculator will show the actual radiated power out.  Concerning using the units as a bridge I would have recomended 2 air points.  But since you have the airBridge you might as well try it.  Use it as if it were a PTMP system, only with one client.

Mike B
Electro-comm

Rick Kosick wrote:

Hi Ian.

    The problem is that the TOTAL has its own built in antenna.
    It should know what's hooked up, no?
===
Rick Kosick
StarLinX Internet Service

----- Original Message ----- 
From: "Ian Ellison" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 05, 2003 8:46 PM
Subject: Re: [smartBridges] Setup Advice Please


  

You need to change the configuration for your antenna, as it has no way
of knowing what you've hooked up.  The TOTAL product probably isnt the
best for what your doing, but you should be able to get it to work.
I've only used smartBridges for AP / CPE solutions, so I cant offer any
more advice on that.  My understanding is they are not too great for
backhauls.  Best of luck.

Ian

Rick Kosick wrote:

    

I have an airBridge TOTAL and an airPoint TOTAL.

I want to create a simple backhaul and don't know which mode is best for
      

me.
  

I simply want to bridge one LAN to another LAN, point to point. The
      

distance
  

is about 1000'.

What is the best mode to configure this as? Reading the manual, it seems
that maybe I should be using two airPoints instead of an airPoint and an
airBridge?

Also, under the Dial-A-Power is lists my Antenna Type as being a 2.2, is
that correct?

Thanks!!
Rick

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
      

smartBridges <yournickname>
  

To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
      

smartBridges)
  

Archives: http://archives.part-15.org


      

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
    

smartBridges <yournickname>
  

To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
    

smartBridges)
  

Archives: http://archives.part-15.org

    

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org