That one will work very nicely..

You can do your poe power requirements calulations at
http://www.gweep.net/%7Esfoskett/tech/poecalc.html
which will show that the 18V over 175ft will give you plenty power.
You will have 4.4 voltage drop over that run with a 24 awg cable (most
outdoor cat5 cable is 24 awg)

Best regards,
 Eje "Aya" Gustafsson                 mailto:[EMAIL PROTECTED]
The Family Entertainment Network      http://www.fament.com
Phone : 620-231-7777                  Fax   : 240-376-7272
            - Your Full Time Professionals -
        Online Store http://www.wisp-router.com/
 MikroTik, Star-OS, PACWireless, EnGenius, RF Industries
-- 

JO> Yeah, thanks.  I ended up ordering the 418-TR1518-12 from Mouser
JO> Electronics.  I hope that works.  My run is for only 175 ft, give or take a
JO> few.

JO>   _____  

JO> Jeremy

JO>   _____  


JO> -----Original Message-----
JO> From: [EMAIL PROTECTED]
JO> [mailto:[EMAIL PROTECTED]
JO> On Behalf Of Kevin Proctor
JO> Sent: Friday, November 07, 2003 5:21 PM
JO> To: [EMAIL PROTECTED]
JO> Subject: RE: [smartBridges] 18v power?

JO> I'm not in at the beginning of this thread, but Mouser electronics sells
JO> the 18v 1A power supply.

JO> Mouser.com
JO> 418-TR2518-12
JO> $14.99 each

JO> They have some others as well, but this one fits the bill nicely.  You
JO> will need to cut the plug off the output side a flop the wires to
JO> correct the polarity, but that should not be a big problem.

JO> Kevin B. Proctor
JO> Customer Service
JO> Internet and International Orders
JO> Electro Comm Distributing Inc
JO> 5015 Paris St
JO> Denver CO 90239
JO> USA
 
JO> Phone: +1-303-371-8182
JO>                 800-525-0173
JO> FAX:    +1-303-371-8158
JO>                 800-423-8018
JO> [EMAIL PROTECTED]
 

JO> -----Original Message-----
JO> From: [EMAIL PROTECTED]
JO> [mailto:[EMAIL PROTECTED] On Behalf Of Hugh Carmichael
JO> Sent: Friday, November 07, 2003 12:15 PM
JO> To: [EMAIL PROTECTED]
JO> Subject: RE: [smartBridges] 18v power?

JO> I also have a 15V which I am going to try.  I guess you adjust up just
JO> enough to ensure your radio has enough power to perform, or do you think
JO> you might harm the radio by not giving it enough power too?



JO> -----Original Message-----
JO> From: [EMAIL PROTECTED]
JO> [mailto:[EMAIL PROTECTED] On Behalf Of Breiland, Derek
JO> Sent: Friday, November 07, 2003 2:13 PM
JO> To: '[EMAIL PROTECTED]'
JO> Subject: RE: [smartBridges] 18v power?

JO> I do not mean FCC certification.  I mean Smartbridges hooking it up in
JO> their
JO> lab and putting it through its courses to cerify that yes it provides
JO> the
JO> necessary power and no it will no burn up your radio.

JO> -----Original Message-----
JO> From: John Hokenson [mailto:[EMAIL PROTECTED] 
JO> Sent: Friday, November 07, 2003 1:01 PM
JO> To: [EMAIL PROTECTED]
JO> Subject: Re: [smartBridges] 18v power?

JO> Their standard response was to recomend this one after I looked it
JO> up--as
JO> for "certification" I guess that is a matter of semantics.  The only
JO> part
JO> FCC certified is the radio/feedline/antenna combination.

JO> JH
JO> ----- Original Message ----- 
JO> From: "Breiland, Derek" <[EMAIL PROTECTED]>
JO> To: <[EMAIL PROTECTED]>
JO> Sent: Friday, November 07, 2003 10:50 AM
JO> Subject: RE: [smartBridges] 18v power?


>> Is it actually certified or did they reply as "Yeah, that should
JO> work".
>>
>> -----Original Message-----
>> From: Don Castella [mailto:[EMAIL PROTECTED]
>> Sent: Friday, November 07, 2003 12:44 PM
>> To: [EMAIL PROTECTED]
>> Subject: Re: [smartBridges] 18v power?
>>
>> ----- Original Message -----
>> From: "John Hokenson" <[EMAIL PROTECTED]>
>> To: <[EMAIL PROTECTED]>
>> Sent: Friday, November 07, 2003 12:18 PM
>> Subject: Re: [smartBridges] 18v power?
>>
>>
>> > They certified the power supply I found for them at Mouser....
>>
>> With the caveat that the supply wires be reversed to provide proper
>> polarity. hardly plug n play!
>>
>> >
>> > JH
>> > ----- Original Message -----
>> > From: "Breiland, Derek" <[EMAIL PROTECTED]>
>> > To: <[EMAIL PROTECTED]>
>> > Sent: Friday, November 07, 2003 8:49 AM
>> > Subject: RE: [smartBridges] 18v power?
>> >
>> >
>> > > It would be really nice if Smartbridges were to actually certify
JO> at
>> least
>> > > one if not several power supply options.
>> > >
>> > > When we start talking about "be careful of the smoke" we are just
>> guessing
>> > > and in this business there is no room for guess work.  If we had a
>> > certified
>> > > product recommended from Smartbridges I think we would all feel
JO> better
>> > about
>> > > using it and in the event we needed support on a problem from
>> SmartBridges
>> > > we would know we are using certified equipment to rule that out.
>> > >
>> > > I am awaiting the release of the POE outdoor.  Even though I have
JO> no
>> > > intentions on using it outdoors it does provide for a higher
JO> voltage
>> level
>> > > for long cable runs as well as some surge protection the way I
>> understand
>> > > it.  Not the cheapest solution but just like anything else you get
JO> what
>> > you
>> > > pay for.
>>
>>
>> The PART-15.ORG smartBridges Discussion List
>> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>> smartBridges <yournickname>
>> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>> smartBridges)
>> Archives: http://archives.part-15.org
>> The PART-15.ORG smartBridges Discussion List
>> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
JO> smartBridges <yournickname>
>> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
JO> smartBridges)
>> Archives: http://archives.part-15.org

JO> The PART-15.ORG smartBridges Discussion List
JO> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
JO> smartBridges <yournickname>
JO> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
JO> smartBridges)
JO> Archives: http://archives.part-15.org  
JO> The PART-15.ORG smartBridges Discussion List
JO> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
JO> smartBridges <yournickname>
JO> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
JO> smartBridges)
JO> Archives: http://archives.part-15.org  
JO> The PART-15.ORG smartBridges Discussion List
JO> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
JO> smartBridges <yournickname>
JO> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
JO> smartBridges)
JO> Archives: http://archives.part-15.org  

JO> The PART-15.ORG smartBridges Discussion List
JO> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
JO> smartBridges <yournickname>
JO> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
JO> smartBridges)
JO> Archives: http://archives.part-15.org  


JO> The PART-15.ORG smartBridges Discussion List
JO> To Join: mailto:[EMAIL PROTECTED] (in the body type
JO> subscribe smartBridges <yournickname>
JO> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
JO> Archives: http://archives.part-15.org
JO> --
JO> [This E-mail scanned for viruses by Declude Virus]


-- 
[This E-mail scanned for viruses by Declude Virus]

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to