I am eager to read and apply more about delta mush. Your post has left me some thoughts. I think I can arm a setup later on the month on a setup of my own, right now I am currently on deadlines. But thanks for sharing; this looks amazing! (artistically driven). Cheers. On May 16, 2016 12:54 PM, "pedro santos" <probi...@gmail.com> wrote:
> Hi Pierre > I'm not doing the animation, but here's the latest test I've uploaded > closer to completion: https://gfycat.com/NaughtySleepyBurro > I'm not using the same corrugation deformer. The previous one was more > interesting but the setup was very mesh specific and with lots of support > calcs not making it very friendly to port around. But it was cool enough > that I could have any custom shape. Shame. > > What of the setup spiked your interest. > > Anyways, Delta Much revealed itself very useful to recover some details > post sim as explained here. A tip for the future: > http://i.imgur.com/mNuSIKf.png > > Cheers > Pedro > > > > On Thu, May 12, 2016 at 3:53 PM, Pierre Schiller < > activemotionpictu...@gmail.com> wrote: > >> Wait, so could we see how did it ended up resulting? and the setup? >> Please? :D >> >> Cheers. >> >> On Thu, May 12, 2016 at 7:12 AM, Jason S <jasonsta...@gmail.com> wrote: >> >>> Like the story of life :P >>> >>> >>> On 05/12/16 7:36, pedro santos wrote: >>> >>> First time using Syflex, so after that fact clicked much simpler to get >>> to what I wanted, yes! Some wasted time on the way, though. >>> >>> Cheers >>> >>> On Thu, May 12, 2016 at 12:21 PM, Olivier Jeannel < >>> facialdel...@gmail.com> wrote: >>> >>>> this was ...simple in the end ? >>>> >>>> >>>> On Thu, May 12, 2016 at 12:46 PM, pedro santos <probi...@gmail.com> >>>> wrote: >>>> >>>>> Just to conclude for any late readers. Constrains need some value in >>>>> distance so the weight map does. Until this clicked it was a bit annoying. >>>>> Going through the old operator documentation helped :) >>>>> >>>>> [image: Inline image 1] >>>>> >>>>> Cheers >>>>> >>>>> On Mon, May 9, 2016 at 3:17 PM, pedro santos <probi...@gmail.com> >>>>> wrote: >>>>> >>>>>> @Olivier The interpolation I was looking for was more in terms of >>>>>> "influence" as a force and not of the point positions as I do that with >>>>>> the >>>>>> Delta Mush, but I'll give it another try on that front. Thanks. >>>>>> >>>>>> @Paul Will give that a stab as ICE one is stabbing me. >>>>>> >>>>>> Cheers >>>>>> >>>>>> >>>>>> On Mon, May 9, 2016 at 9:53 AM, <p...@bustykelp.com> wrote: >>>>>> >>>>>>> One thing I’d say about Syflex is that the original non ICE version, >>>>>>> produces far better results in general than the ICE one, especially when >>>>>>> using things like Pinning. Its a totally different and more complex / >>>>>>> interesting result. >>>>>>> Worth trying to see the difference anyway. >>>>>>> >>>>>>> *From:* Olivier Jeannel <facialdel...@gmail.com> >>>>>>> *Sent:* Monday, May 09, 2016 8:51 AM >>>>>>> *To:* softimage@listproc.autodesk.com >>>>>>> *Subject:* Re: Is there a well know workflow to have deformers >>>>>>> drive/blendnicely with Syflex? >>>>>>> >>>>>>> A blend between positions ? >>>>>>> I think instead of using the exe out port of Syflex, you can dive >>>>>>> inside and output the point position. >>>>>>> Then blend (linear interpolate) between your "shape" point position >>>>>>> with a weightmap. >>>>>>> Not always ideal, because you usualy feels the "over the top" >>>>>>> deformation. >>>>>>> I sometimes used Mimic, but I had to fight with the stiff result. >>>>>>> >>>>>>> On Mon, May 9, 2016 at 8:53 AM, pedro santos <probi...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> I like to build setups that are immediate, so I usually avoid >>>>>>>> simulation venues as they bring a processing overhead and visualization >>>>>>>> restriction (you have to build up from frame 0/1), but this time I >>>>>>>> couldn't >>>>>>>> escape and I'm struggling to have to artistic direction with Syflex. >>>>>>>> So you have a reference of what I have in hands and accomplished so >>>>>>>> far: https://gfycat.com/WearyHappygoluckyAnole >>>>>>>> >>>>>>>> Issues: >>>>>>>> - I need to something like silk under water. I'm struggling to get >>>>>>>> the right mesh density/parameters/setup/forces for this and it seems >>>>>>>> whenever I change Syflex to something it's closer to it I bring it to a >>>>>>>> halt. >>>>>>>> - It's not clear to me the best way to blend between deformers and >>>>>>>> cloth so everything before the Syflex ICE operator can drive the sim >>>>>>>> but >>>>>>>> also be changed by it: >>>>>>>> a) I tried Mimic to another mesh, but although I could even animate >>>>>>>> the weight map to have a transition the interpretation of the weight >>>>>>>> map >>>>>>>> values is too abrupt: I can only get some transition effect between >>>>>>>> around >>>>>>>> .01 and down, otherwise it will Mimic completely. >>>>>>>> b) I went with Pin instead but the weight map in this one doesn't >>>>>>>> even work. So it's just the cluster which is also quit abrupt but I >>>>>>>> like >>>>>>>> more the simulation in this one of the unaffected parts. If there's no >>>>>>>> simulation stack can use the object it"self" to as Pin input. >>>>>>>> Simulated ICE >>>>>>>> tree also seems quite slower. >>>>>>>> >>>>>>>> I've read some threads but nothing conclusive, especially because >>>>>>>> it's a subject that requires lootttss of testing. So thank you for any >>>>>>>> insight. >>>>>>>> >>>>>>>> Cheers >>>>>>>> Pedro >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> * ------------------------------ [image: >>>>>>>> http://i153.photobucket.com/albums/s202/animatics/probiner-sig.gif] >>>>>>>> Pedro >>>>>>>> Alpiarça dos Santos >> http://probiner.xyz/ <http://probiner.xyz/> >>>>>>>> <http://probiner.x10.mx/> * >>>>>>>> >>>>>>>> ------ >>>>>>>> Softimage Mailing List. >>>>>>>> To unsubscribe, send a mail to >>>>>>>> softimage-requ...@listproc.autodesk.com with "unsubscribe" in the >>>>>>>> subject, and reply to confirm. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> ------------------------------ >>>>>>> ------ >>>>>>> Softimage Mailing List. >>>>>>> To unsubscribe, send a mail to >>>>>>> softimage-requ...@listproc.autodesk.com with "unsubscribe" in the >>>>>>> subject, and reply to confirm. >>>>>>> >>>>>>> ------ >>>>>>> Softimage Mailing List. >>>>>>> To unsubscribe, send a mail to >>>>>>> softimage-requ...@listproc.autodesk.com with "unsubscribe" in the >>>>>>> subject, and reply to confirm. >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> >>>>>> >>>>>> * ------------------------------ [image: >>>>>> http://i153.photobucket.com/albums/s202/animatics/probiner-sig.gif] Pedro >>>>>> Alpiarça dos Santos >> http://probiner.xyz/ <http://probiner.xyz/> >>>>>> <http://probiner.x10.mx/> * >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> >>>>> >>>>> * ------------------------------ [image: >>>>> http://i153.photobucket.com/albums/s202/animatics/probiner-sig.gif] Pedro >>>>> Alpiarça dos Santos >> http://probiner.xyz/ <http://probiner.xyz/> >>>>> <http://probiner.x10.mx/> * >>>>> >>>>> ------ >>>>> Softimage Mailing List. >>>>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com >>>>> with "unsubscribe" in the subject, and reply to confirm. >>>>> >>>> >>>> >>>> ------ >>>> Softimage Mailing List. >>>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com >>>> with "unsubscribe" in the subject, and reply to confirm. >>>> >>> >>> >>> >>> -- >>> >>> >>> >>> * ------------------------------ [image: >>> http://i153.photobucket.com/albums/s202/animatics/probiner-sig.gif] Pedro >>> Alpiarça dos Santos >> http://probiner.xyz/ <http://probiner.xyz/> >>> <http://probiner.x10.mx/> * >>> >>> >>> This body part will be downloaded on demand. >>> >>> >>> >>> ------ >>> Softimage Mailing List. >>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com >>> with "unsubscribe" in the subject, and reply to confirm. >>> >> >> >> >> -- >> Portfolio 2013 <http://be.net/3dcinetv> >> Cinema & TV production >> Video Reel <https://vimeo.com/3dcinetv/reel2012> >> >> ------ >> Softimage Mailing List. >> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com >> with "unsubscribe" in the subject, and reply to confirm. >> > > > > -- > > > > *------------------------------[image: > http://i153.photobucket.com/albums/s202/animatics/probiner-sig.gif]Pedro > Alpiarça dos Santos >> http://probiner.xyz/ <http://probiner.xyz/> > <http://probiner.x10.mx/>* > > ------ > Softimage Mailing List. > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com > with "unsubscribe" in the subject, and reply to confirm. >
------ Softimage Mailing List. To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with "unsubscribe" in the subject, and reply to confirm.