On Wed, 08 Feb 2006 14:05:23 +0100, Max Stricker wrote > >Are you using hotplug or udev to load the firmware? > > hotplug, and its started correctly: > > usb 2-1: new full speed USB device using uhci_hcd and address 2 > usb 2-1: reset full speed USB device using uhci_hcd and address 2 > speedtch 2-1:1.0: no stage 1 firmware found! > usb 2-1: USB disconnect, address 2 > > >What kernel version are you using? > 2.6.15 > > Above dmesg says that speedtch can't find the stage 1 firmware, but > ls /lib/firmware/ returns > speedtch-1.bin speedtch-2.bin > > And before my last reboot the modem worked correctly... > Thanks for your help! > Any other ideas?
Upgrade to latest udev, and add a rule to default-rules so that hotplug won't try to load firmware. I had that problem with udev 081 using the wrong firmware name, and after solving that I had hotplug and udev fighting to load the firmware at the same time. One alternative, is to remove udev's firmware_helper, so hotplug will try and load the firmware. -- Jose Bernardo B R Silva | Source Mage GNU/Linux Section Guru [EMAIL PROTECTED] | http://www.sourcemage.org http://counter.li.org #245602 http://cosmos.oninetspeed.pt/jose.bernardo [EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
