Hi @ all, here I am again. The last days I tried to fix the problem with my speedtouch, but without success! I tried all hints i became: updating udev, install udev_run etc. Here is my actual config:
* sys-apps/hotplug Latest version available: 20040923-r1 Latest version installed: 20040923-r1 Size of downloaded files: 43 kB Homepage: http://linux-hotplug.sourceforge.net Description: USB and PCI hotplug scripts License: GPL-2 * sys-fs/udev Latest version available: 079-r1 Latest version installed: 079-r1 Size of downloaded files: 650 kB Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html * net-dialup/ppp Latest version available: 2.4.2-r15 Latest version installed: 2.4.2-r15 Size of downloaded files: 814 kB Homepage: http://www.samba.org/ppp Description: Point-to-point protocol (PPP) License: BSD GPL-2 and always the same error: server ~ # dmesg |grep 'speedt\|DSL' usbcore: registered new driver speedtch speedtch 2-1:1.0: no stage 1 firmware found! Any other ideas? Greets from Italy Max Andrew Benton wrote: >Jos� Bernardo Silva wrote: > > >>Upgrade to latest udev, and add a rule to default-rules so that hotplug won't >>try to load firmware. I had that problem with udev 081 using the wrong >>firmware name, and after solving that I had hotplug and udev fighting to load >>the firmware at the same time. >>One alternative, is to remove udev's firmware_helper, so hotplug will try and >>load the firmware. >> >> > >I disagree, I think it makes more sense to use udev's firmware_helper to >load the firmware. The alternative (install the udev_run_hotplugd binary >and use that to run the hotplug scripts in the old way) should work, but >the hotplug scripts are deprecated and unmaintained. Udev is the way >things are going. > >Andy > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]