Right, but the 1500 flywheel won't mate up to the early 1300 small bearing crankshaft as I recall. Or will it?. Since he said he has what appears to be a 1500 flywheel on his engine, I figured he had the later large bearing engine in there.
>>> "Joe Curry" <[EMAIL PROTECTED]> 03/26/04 09:20AM >>> I beg to differ, my friend! A Mk3 flywheel is flat on the surface and the 1500 flywheel has a ridge where the pressure plate mounts. There is no way that a 1500 clutch kit will work on a Mk3 flywheel and vice-versa. Joe ----------------------------------------------------- The information contained in this communication may be confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please re-send this communication to the sender and delete the original message and any copy of it from your computer system. Thank you. ----------------------------------------------------- <<<<GWIASIG 0.07>>>> *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
