Is this a new pump?  Under factory warrantee?
To be accepted, it has to meet nameplate.  If it didn't, why specify?
New pump, you have a beef.  Old pump, time to make some changes.
Nameplate RPM is at 150%, not churn or design.  Is rpm within the range of
the driver?
Sounds like someone needs a PRV.
Tom


Dear All,

I have got a problem with a fire pump.

The pump performance does not match the name plant data.

The cause is the Diesel Engine.

The engine RPM deviation from "No Load" to 150% nominal is 90 rpm, just over
5% of the nominal (1760 rpm).

The result is too high pressure (5% excess) at churning causing operation of
the 175psi relief valves of the sprinkler systems,

At the other end, 150% flow, the pressure is 5% below the name plant data.

The question: To what extent the pump supplier is bound by the name plant
performance data.

The supplier Rep. argues that 5% deviation is within the normal.


Dan Arbel
Tel: 972-4-8243337
Fax: 972-4-8243278
M: 972-52-2810593


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to