Greg,
Is the closet built into the walls of the unit? Only thing I see about
independent feed is it will mess up floor zoning.

R/
Matt

Matthew J. Willis
Norred Fire Systems L.L.C.
318-387-1134 Voice
318-387-1163 Facsimile
[email protected]

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Greg McGahan
Sent: Friday, February 13, 2009 1:48 PM
To: [email protected]
Subject: water source heat pumps

OK gang I need some advice hopefully based on experience.

We are doing an independent hotel  that is being constructed more like a
typical condominium. In the far end of each unit (room), there is a small
enclosed closet without a door, but with a removable cover that houses a
Water Source Heat Pump.

I have assumed sprinkler will be required up to this point but I am open to
comments on that. There is NO WAY to get concealed piping to the closet at
this time. The Building is 9 Stories tall with separate FCV's on each floor
etc.

My Question is can I feed these closets like a shaft from the 1st floor
system all of the way up in order to avoid a lot of grief and trouble to get
the owner to add soffits in every Unit?

All comments welcome except those that point out something painfully obvious
I may be missing.

Greg McGahan
Operations Manager

Living Water Fire Protection
1160 McKenzie Road
P.O. Box 877
Cantonment, Florida 32533
(850) 937.1850 | Fax (850) 937.1852 | Cell (850) 554.3231
[email protected]

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to