Anytime we have a wiring question, we direct them to the pump company we purchased it from. These same people do the start up and have to verify the wiring to be correct before they ever start it. They are always willing to talk to the electrician direct, I also supply the submittal info to the electrician before hand, if it doesn't answer his questions he can reference it while the pump rep is walking him through it.
Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom Duross Sent: Wednesday, March 11, 2009 7:50 AM To: [email protected] Subject: Fire Pump Motor Question I'm trying to locate a link, not necessarily "fire pump motor" only, but something I can refer the plethora of electrician who can't seem to wire a fire pump motor. There are different methods according to the starting means and motor criteria (single vs. dual voltage, etc.). I'm finding many of the motor manufacturers' diagrams within the terminal box don't match the controller manufacturers' wiring diagrams within the enclosure and neither seem to cover all the possibilities of driver selection by the pump manufacturers. Anyone have a good source? tia Tom Duross Go Red Sox _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
