Have come across similar issues. The architect exploded his drawing prior to sending, and the problem was solved.
Tony -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Todd Williams Sent: March 16, 2010 4:29 AM To: [email protected] Subject: Architectural Desktop Here's one for the computer jockeys. Has anyone had problems converting drawings from architects drawn in Architectural Desktop? I am running in to situations where ceiling plans, walls at angles, etc. are not showing up or just showing as a large rectangle covering the overall area. I am using Autosprink, but the same thing is happening when I open it up in regular Autocad (2006). Thoughts? Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut 860-535-2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
