You should be able to view and manipulate Architectural Desktop items if you have the proper Object Enabler installed. See the following link:
http://usa.autodesk.com/adsk/servlet/ps/dl/index?siteID=123112&id=2334440&li nkID=9240618 I believe that the links to the older versions of AutoCAD are bad but the link to the Autodesk Architectural Desktop 2006 Enabler link is good. Michael Ricks Katco Fire Sprinkler Design P.O. Box 607 555 South 100 East Salem, UT 84653 801-423-3096 Cell: 801-380-4651 -----Original Message----- From: A.P.Silva [mailto:[email protected]] Sent: Tuesday, March 16, 2010 1:45 PM To: [email protected] Subject: RE: Architectural Desktop Have come across similar issues. The architect exploded his drawing prior to sending, and the problem was solved. Tony -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Todd Williams Sent: March 16, 2010 4:29 AM To: [email protected] Subject: Architectural Desktop Here's one for the computer jockeys. Has anyone had problems converting drawings from architects drawn in Architectural Desktop? I am running in to situations where ceiling plans, walls at angles, etc. are not showing up or just showing as a large rectangle covering the overall area. I am using Autosprink, but the same thing is happening when I open it up in regular Autocad (2006). Thoughts? Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut 860-535-2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
