OK. The last shed structure I dealt with was next to the water where wind could be an issue. However, a shed without walls, I would think, have very different burn characteristics than an enclosed space. The structure is more like a giant ceiling cloud that a room. Are you going to get a significant flow of fresh air at floor (or fire) level to replace the hot air escaping all sides around the roof? If this going to increase the intensity of the burn? Haven't done any research, but those are just questions.
At 02:56 PM 7/12/2010, you wrote: >Todd, if a drum goes up, there'd have to be a heckuva wind to not have the >sprinklers activate- even by radiant heat. > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Todd Williams >Sent: Monday, July 12, 2010 2:45 PM >To: [email protected] >Subject: RE: Flammable Liquid storage in open sheds > >And since the building has no walls, how is wind going to factor in? > > > >At 02:30 PM 7/12/2010, you wrote: > >And then there's that ever elusive, non-conforming to anything, type of > >storage container that so often pops up. Chemical storage is one of > >the most aggravating things I have to deal with. Everyone expects > >cookie-cutter answers. Yeah, I wish. Then there's the chase your tail > >in a circle Code search for containment that can confuse the daylights > >out of people. > > > >Craig L. Prahl, CET > >Fire Protection Specialist > >Mechanical Department > >CH2MHILL > >Lockwood Greene > >1500 International Drive > >Spartanburg, SC 29304-0491 > >Direct - 864.599.4102 > >Fax - 864.599.8439 > >[email protected] > >http://www.ch2m.com > > > > > >-----Original Message----- > >From: [email protected] > >[mailto:[email protected]] On Behalf Of George > >Church > >Sent: Monday, July 12, 2010 2:30 PM > >To: [email protected] > >Subject: RE: Flammable Liquid storage in open sheds > > > >and just when you think you've tracked down all the questions, you open > >up NFPA 30 and then the phone, "relieving or non-relieving?" > > > >NFPA 30 has been given to us to add back the fun we used to have with > >231C, which many of us don't get to experience as much with the > >popularity of ESFRs. > >I loved asking aisle widths for a spec whse, knowing the answer. > > > >glc > > > >-----Original Message----- > >From: [email protected] > >[mailto:[email protected]] On Behalf Of > >[email protected] > >Sent: Monday, July 12, 2010 2:09 PM > >To: [email protected] > >Subject: RE: Flammable Liquid storage in open sheds > > > >There are a lot of variables that need to be known before answering a > >question like that. > > > >Depending on what building or fire code applies the answers can vary, > >also the location of the shed with respect to exposure of other > >buildings or public ways can factor in and in a lot of cases with a > >Class III combustible, there may not be any need whatsoever for any > >kind of fixed fire protection. There needs to be some code research > >performed and you need to know what the material is. You can spray all > >the water you want on certain types of combustible liquids and > >accomplish nothing, you may need foam or foam-water. > > > >Too many unknowns here. > > > >Craig L. Prahl, CET > >Fire Protection Specialist > >Mechanical Department > >CH2MHILL > >Lockwood Greene > >1500 International Drive > >Spartanburg, SC 29304-0491 > >Direct - 864.599.4102 > >Fax - 864.599.8439 > >[email protected] > >http://www.ch2m.com > > > >-----Original Message----- > >From: [email protected] > >[mailto:[email protected]] On Behalf Of sam b > >Sent: Monday, July 12, 2010 1:56 PM > >To: [email protected] > >Subject: Flammable Liquid storage in open sheds > > > >Hii.. > > > >Need some help > > > >Storage:in drums > >Flammaeble liquid: Class III > >Rack storage up to max 5 m. > >Open shed storage with no walls (max height of shed is 7 m at eave) . > > > > > >Can i know what sort of protection I need to provide(Sprinkler > >system?). I checked NFPA 30 .but couldnt find the exact thing. > > > >I think chapter 15,NFPA2008 edition suits the scenario. But what sort > >of protection and design density to consider. > > > >Can anyone give me a quick answer.? > > > >Thaanks in advance > > > >Regards > >Sam > >_______________________________________________ > >Sprinklerforum mailing list > >[email protected] > >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >For Technical Assistance, send an email to: [email protected] > > > >To Unsubscribe, send an email > >to:[email protected] > >(Put the word unsubscribe in the subject field) > >_______________________________________________ > >Sprinklerforum mailing list > >[email protected] > >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >For Technical Assistance, send an email to: [email protected] > > > >To Unsubscribe, send an email > >to:[email protected] > >(Put the word unsubscribe in the subject field) > > > >_______________________________________________ > >Sprinklerforum mailing list > >[email protected] > >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >For Technical Assistance, send an email to: [email protected] > > > >To Unsubscribe, send an email > >to:[email protected] > >(Put the word unsubscribe in the subject field) > >_______________________________________________ > >Sprinklerforum mailing list > >[email protected] > >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >For Technical Assistance, send an email to: [email protected] > > > >To Unsubscribe, send an email > >to:[email protected] > >(Put the word unsubscribe in the subject field) > >Todd G. Williams, PE >Fire Protection Design/Consulting >Stonington, CT >860.535.2080 >www.fpdc.com > >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) > >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, CT 860.535.2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
