Ok --
Let me lay it out -
I have two flow tests; one from a branch main and one from a supply main.
Both 'residual' are actually pitot readings, about 300 ft apart
through a 6" main.
I'm using the test with the lower residual pressure.
These tests are:
52 / 31 / 924
and
51 / 9 / 503
I'm pretty sure that I've come up with a residual pressure but was
looking for another
method (one that only the one-piece test kit people know, apparently)
to check me.
Anyone that feels like it, play away. And if any Pollard Hydrant Pro
or Hose Monster folks are
looking in, tell me the secret!
Vince
Vince Sabolik, West Tech Fire Protection, Inc.
11351 Pearl Road / Strongsville, Ohio 44136 440
238-4800 Fax 440 238-4876
____________________________________________________________________
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)