edwardian wrote: > I used a Berkeley Alpha USB with the Touch and EDO (0.5) as well as the > Wavelength WaveLink (both use the same Streamlength code) - and it > worked no problem. The device is definitely supported, so perhaps you > can retrace your steps and see what you did wrong. I don't mean to > overstate the obvious, but it is imperative that the Touch be completely > powered off, then plug in the Berkeley to the Touch and power up the > Berkeley, and then power up the Touch and install EDO with the Berkeley > already connected. > > Also, if you indeed followed that procedure, after EDO installed were > you able to see (and select) the Berkeley when you went to "Digital > Output" to select a device?
Thank you edwardian, after reading your post i reset to factory settings and gave it another try, and this time it worked:) BTW, did you compare the SBT to a PC or MAC? My initial impression is that I get slightly better sound from a PC, but I need to do some more testing. ------------------------------------------------------------------------ Lespaul's Profile: http://forums.slimdevices.com/member.php?userid=56250 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch