jdt7385 wrote: > b. Two Motorola Model VT2442 telephone adapters/routers to connect three > telephone lines (VOIP).
1) Download the VT2442 User Guide from http://www2.vonage.com/support/files/pdf/VT2442_UserGuide.pdf 2) For each VT2442, log into the administration interface following the instructions on page 13. For this to work you'll need to a) Disconnect your desktop ethernet from the linksys. b) Disconnect both Vonage Routers and power them down. c) Connect your desktop ethernet cable to the ethernet jack on the back of one of the Vonage routers. d) Power up that Vonage Router. e) Reboot your desktop. You should be able to log into the router and do step 3 below. f) Repeat steps (c)-(e) for the second Vonage router. 3) For each Vt2442, See pages 20-21 of the User Manual for Setup->Lan Configuration to set "Server and Relay Off" instead of one of the other 2 DHCP settings. 4) Do not plug any ethernet cables into the Vonage routers - only phone cables. 5) Also make sure to use the blue "Internet" port of the Vonage routers when connecting them to the Linksys router. Good luck, Kim PS - I had a friend who had endless problems with Vonage, found their support terrible, and finally dropped them for Ooma, which he loves. ------ Touch -> GW Labs upsampler -> TacT RCS 2.2X -> Convolver PC (Win7 + AcourateConvolver + RME HDSP-AES-32)-> Apogee Big Ben -> (TacT S2150 -> Vandersteen 3a Signature) + (TacT S2150 -> TacT W210) ------------------------------------------------------------------------ krochat's Profile: http://forums.slimdevices.com/member.php?userid=6579 View this thread: http://forums.slimdevices.com/showthread.php?t=99456 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
