u-boot  

Messages by Thread

• • [PATCH v9 17/19] MAINTAINER: update Spacemit K1 entry Eric Chung
  • [PATCH v9 18/19] doc: spacemit: flash on K1 SoC based boards Eric Chung
  • [PATCH v9 19/19] spacemit: k1: fix product name detection and DTB matching in SPL Eric Chung
  • [PATCH v9 06/19] riscv: dts: spacemit: k1: add SD card controller and pinctrl support Eric Chung
  • [PATCH v9 14/19] riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes Eric Chung
  • [PATCH v9 07/19] riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes Eric Chung
  • Re: [PATCH v9 00/19] spacemit mmc driver Iker Pedrosa
  • Re: [PATCH v9 00/19] spacemit mmc driver Eric Chung
  • Re: [PATCH v9 00/19] spacemit mmc driver Iker Pedrosa
  • Re: [PATCH v9 00/19] spacemit mmc driver Yixun Lan
  • Re: [PATCH v9 00/19] spacemit mmc driver Eric Chung
  • Re: [PATCH v9 00/19] spacemit mmc driver Eric Chung
• Re: [PATCH v1 0/2] reset: small cleanups for x86 dmukhin
  • Re: [PATCH v1 0/2] reset: small cleanups for x86 Simon Glass
• [PATCH v2] disk: update partition type reporting dmukhin
  • Re: [PATCH v2] disk: update partition type reporting Heinrich Schuchardt
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. Valentin Liu
  • [PATCH v1 2/2] boot: android: Add AVB verification support for different bootflow. Valentin Liu
  • Re: [PATCH v1 2/2] boot: android: Add AVB verification support for different bootflow. Simon Glass
  • Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. Simon Glass
  • Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. Tom Rini
  • Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. Simon Glass
  • Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. Tom Rini
  • Re：Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. 刘垣辰
  • Re: Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth. Simon Glass
• [PATCH] usb: ehci-vf: take the controller index from the device tree Mehmet Fide
  • Re: [PATCH] usb: ehci-vf: take the controller index from the device tree Marek Vasut
• [PATCH 0/2] STM32MP: Fix FWU related compilation issues Patrice Chotard
  • [PATCH 2/2] board: st: Fix compilation issue Patrice Chotard
  • Re: [PATCH 2/2] board: st: Fix compilation issue Patrick DELAUNAY
  • Re: [PATCH 2/2] board: st: Fix compilation issue Patrice CHOTARD
  • [PATCH 1/2] ARM: stm32mp2: fix TAMP_FWU_BOOT_IDX_MASK/OFFSET definition Patrice Chotard
  • Re: [PATCH 1/2] ARM: stm32mp2: fix TAMP_FWU_BOOT_IDX_MASK/OFFSET definition Patrice CHOTARD
• Re: [PATCH v3] boot: android: Add support for the bootflow of Android 13+ Mattijs Korpershoek
• [PATCH 1/1] mtd: QEMU uses 32-bit port width for ARM and RISC-V Heinrich Schuchardt
• Re: [PATCH] video: panel: Support for startek-kd070fhfid015 MIPI-DSI panel David Lechner
• Re: [PATCH v2] buildman: Differentiate 32-bit and 64-bit LoongArch variants Tom Rini
• [PATCH] power: domain: mtk: remove setting DCM_TOP_EN David Lechner
  • Re: [PATCH] power: domain: mtk: remove setting DCM_TOP_EN Julien Stephan
  • Re: [PATCH] power: domain: mtk: remove setting DCM_TOP_EN David Lechner
  • Re: [PATCH] power: domain: mtk: remove setting DCM_TOP_EN Carlo Caione
• [PATCH] tools: fwumdata: fix redundant metadata buffer overlap Patrice Chotard
  • Re: [PATCH] tools: fwumdata: fix redundant metadata buffer overlap Kory Maincent
• [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Nathan Whitehorn
  • Re: [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Conor Dooley
  • Re: [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Jamie.Gibbons
  • Re: [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Nathan Whitehorn
• [PATCH] net: airoha: fix PCS calibration retry limit Li Xiao
  • Re: [PATCH] net: airoha: fix PCS calibration retry limit Jerome Forissier
• [PATCH v2 0/3] No-SPL Boot Support Gokul Praveen
  • [PATCH v2 2/3] arm: k3-binman: add tinospl.bin for direct U-Boot boot Gokul Praveen
  • [PATCH v2 1/3] configs: add no-SPL mode fragment for k3 devices Gokul Praveen
  • [PATCH v2 3/3] doc: ti: document no-SPL boot mode for J784S4 EVM Gokul Praveen
  • Re: [PATCH v2 0/3] No-SPL Boot Support Tom Rini
  • Re: [PATCH v2 0/3] No-SPL Boot Support Gokul Praveen
• [PATCH v4] test/py: nand: Add tests for NAND flash device Love Kumar
  • Re: [PATCH v4] test/py: nand: Add tests for NAND flash device Tom Rini
• [PATCH v3 00/11] arm: u8500: Enable upstream DT based SD card boot Linus Walleij
  • [PATCH v3 02/11] mmc: arm_pl180: Configure Ux500 signal direction Linus Walleij
  • [PATCH v3 05/11] mmc: arm_pl180: Power down card supplies at OS handoff Linus Walleij
  • [PATCH v3 03/11] mmc: arm_pl180: Gate idle card clocks Linus Walleij
  • [PATCH v3 01/11] pinctrl: Add compact Nomadik pin controller Linus Walleij
  • [PATCH v3 04/11] mmc: arm_pl180: Set initial supply voltages Linus Walleij
  • [PATCH v3 07/11] arm: u8500: Enable SD card regulators Linus Walleij
  • [PATCH v3 08/11] configs: stemmy: Boot EFI from external SD card Linus Walleij
  • [PATCH v3 06/11] power: regulator: Add AB8500 AUX3 support Linus Walleij
  • [PATCH v3 10/11] arm: u8500: Give Golden panel regulators unique names Linus Walleij
  • [PATCH v3 11/11] arm: u8500: Enter fastboot with volume-down button Linus Walleij
  • [PATCH v3 09/11] arm: u8500: Switch Stemmy to upstream Janice device tree Linus Walleij
• [PATCH v3 0/6] watchdog: report effective timeout Juuso Rinta
  • [PATCH v3 2/6] watchdog: wdt-uclass: report effective timeout in start print Juuso Rinta
  • [PATCH v3 4/6] watchdog: octeontx_wdt: set max_timeout_ms in probe Juuso Rinta
  • [PATCH v3 6/6] test: wdt: add a test for max_timeout_ms Juuso Rinta
  • [PATCH v3 1/6] watchdog: wdt-uclass: rename str to svc_str in wdt_start() Juuso Rinta
  • [PATCH v3 3/6] watchdog: sbsa_gwdt: set max_timeout_ms in probe Juuso Rinta
  • [PATCH v3 5/6] watchdog: sandbox_wdt: set max_timeout_ms in probe Juuso Rinta
  • Re: [PATCH v3 0/6] watchdog: report effective timeout Quentin Schulz
  • Re: [PATCH v3 0/6] watchdog: report effective timeout Stefan Roese
  • Re: [PATCH v3 0/6] watchdog: report effective timeout juuso . rinta
• [PATCH v2 0/4] board: imx93_evk: add i.MX93W EVK support alice . guo
  • [PATCH v2 2/4] imx93: clock: add 450MHz DDR PLL rate alice . guo
  • [PATCH v2 4/4] board: imx93w_evk: add board support for i.MX93W EVK alice . guo
  • [PATCH v2 3/4] board: imx93_evk: add LPDDR4X 3600MTS timing tables alice . guo
  • [PATCH v2 1/4] imx93: clock: add 900MHz entry to fractional PLL rate table alice . guo
  • 回复: [PATCH v2 0/4] board: imx93_evk: add i.MX93W EVK support Alice Guo (OSS)
• [PATCH v4 0/3] net: fsl_enetc: Add SGMII 1G for i.MX95 alice . guo
  • [PATCH v4 1/3] net: fsl_enetc_xpcs_phy: Extract common PMA MMD init sequence into helper function alice . guo
  • Re: [PATCH v4 1/3] net: fsl_enetc_xpcs_phy: Extract common PMA MMD init sequence into helper function Marek Vasut
  • [PATCH v4 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 Ethernet PHY Wrapper alice . guo
  • Re: [PATCH v4 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 Ethernet PHY Wrapper Marek Vasut
  • [PATCH v4 3/3] net: fsl_enetc: Add 1G SGMII mode support for i.MX95 alice . guo
  • Re: [PATCH v4 3/3] net: fsl_enetc: Add 1G SGMII mode support for i.MX95 Marek Vasut
• [PATCH] spi: Handle spi-{tx,rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX Cole Munz
  • Re: [PATCH] spi: Handle spi-{tx, rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX Alexey Charkov
  • [PATCH] spi: rockchip: skip the unused FIFO direction on a one-wire device Cole Munz
  • Re: [PATCH] spi: rockchip: skip the unused FIFO direction on a one-wire device Alexey Charkov
  • Re: [PATCH] spi: rockchip: skip the unused FIFO direction on a one-wire device Quentin Schulz
  • Re: [PATCH] spi: Handle spi-{tx,rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX Quentin Schulz
• [PATCH] arm: dts: mediatek: remove mt6357.dtsi David Lechner
  • Re: [PATCH] arm: dts: mediatek: remove mt6357.dtsi Julien Stephan
  • Re: [PATCH] arm: dts: mediatek: remove mt6357.dtsi David Lechner
• Re: [security] Report of possible heap buffer overflow in U-Boot EFI image verification under Secure Boot (ANT-2026-R09Q9YM0) Heinrich Schuchardt
• [PATCH] reset: meson: Add s4 support Sean Anderson
  • Re: [PATCH] reset: meson: Add s4 support Neil Armstrong
• [PATCH 0/9] arm64: meson: Add s4 support Sean Anderson
  • [PATCH 6/9] clk: meson: Support fractional fixed-factor clocks Sean Anderson
  • Re: [PATCH 6/9] clk: meson: Support fractional fixed-factor clocks Neil Armstrong
  • [PATCH 9/9] [RFT] meson: Add Khadas VIM1S support Sean Anderson
  • Re: [PATCH 9/9] [RFT] meson: Add Khadas VIM1S support Neil Armstrong
  • Re: [PATCH 9/9] [RFT] meson: Add Khadas VIM1S support Sean Anderson
  • [PATCH 2/9] clk: meson: a1: Eliminate separate id parameter Sean Anderson
  • Re: [PATCH 2/9] clk: meson: a1: Eliminate separate id parameter Neil Armstrong
  • [PATCH 3/9] clk: meson: a1: Use clk_set_rate from meson_mux_set_rate Sean Anderson
  • Re: [PATCH 3/9] clk: meson: a1: Use clk_set_rate from meson_mux_set_rate Neil Armstrong
  • [PATCH 5/9] clk: meson: Export a1 functions to common file Sean Anderson
  • Re: [PATCH 5/9] clk: meson: Export a1 functions to common file Neil Armstrong
  • [PATCH 7/9] clk: meson: Support power-of-two dividers Sean Anderson
  • Re: [PATCH 7/9] clk: meson: Support power-of-two dividers Neil Armstrong
  • [PATCH 4/9] clk: meson: Use soc-specific naming for common functions Sean Anderson
  • Re: [PATCH 4/9] clk: meson: Use soc-specific naming for common functions Neil Armstrong
  • [PATCH 8/9] clk: meson: Add s4 clock driver Sean Anderson
  • Re: [PATCH 8/9] clk: meson: Add s4 clock driver Neil Armstrong
  • [PATCH 1/9] arm64: meson: Add s4 SoC support Sean Anderson
  • Re: [PATCH 1/9] arm64: meson: Add s4 SoC support Neil Armstrong
  • Re: [PATCH 1/9] arm64: meson: Add s4 SoC support Sean Anderson
• [PATCH] mmc: meson: Parse devicetree properties Sean Anderson
  • Re: [PATCH] mmc: meson: Parse devicetree properties Neil Armstrong
• [PATCH 1/2] pinctrl: meson: a1: Use gpio regs for ds Sean Anderson
  • [PATCH 2/2] pinctrl: meson: Add s4 pin controller Sean Anderson
  • Re: [PATCH 2/2] pinctrl: meson: Add s4 pin controller Neil Armstrong
  • Re: [PATCH 1/2] pinctrl: meson: a1: Use gpio regs for ds Neil Armstrong
• [PATCH] watchdog: meson_gxbb: Add support for s4/t7 SoCs Sean Anderson
  • Re: [PATCH] watchdog: meson_gxbb: Add support for s4/t7 SoCs Neil Armstrong
• [PATCH] serial: meson: Add s4 support Sean Anderson
  • Re: [PATCH] serial: meson: Add s4 support Neil Armstrong
• Re: [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Nathan Whitehorn
  • Re: [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Conor.Dooley
  • Re: [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Nathan Whitehorn
  • Re: [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Conor Dooley
  • Re: [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware. Nathan Whitehorn
• Re: [security] Report of possible heap overflow in U-Boot EFI TCG2 boot loader (ANT-2026-CBSBSFG8) Heinrich Schuchardt
• [PATCH] blkcache: include the hardware partition in the cache key Daniel Golle
  • Re: [PATCH] blkcache: include the hardware partition in the cache key Tom Rini
• [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver Vandhiadevan Karunamoorthy via U-Boot
  • Re: [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver Balaji Selvanathan
  • Re: [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver Vandhiadevan Karunamoorthy
  • Re: [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver Casey Connolly
• [PATCH 0/2] usb: gdaget: f_mass_storage: various fixes Patrice Chotard
  • [PATCH 2/2] usb: gadget: f_mass_storage: Optimize schedule() call Patrice Chotard
  • [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable Patrice Chotard
  • Re: [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable Heinrich Schuchardt
  • Re: [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable Marek Vasut
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A) Vincent Jardin
  • [PATCH v1 01/23] board: nxp: add Nodebox v3 CPU Module (LX2160A) base port Vincent Jardin
  • [PATCH v1 02/23] doc: board: nxp: add the Nodebox v3 CPU Module (nbxv3) Vincent Jardin
  • [PATCH v1 03/23] board: nbxv3: enable RTL8211FD PHY for 1G DPAA2 Vincent Jardin
  • [PATCH v1 04/23] board: nbxv3: add MPQ8785 PMBus traces + DT regulator Vincent Jardin
  • [PATCH v1 05/23] board: nbxv3: add boot-time PMBus PSU traces Vincent Jardin
  • [PATCH v1 06/23] board: nbxv3: add VID-fuse driven core voltage Vincent Jardin
  • [PATCH v1 07/23] board: nbxv3: select carrier at boot Vincent Jardin
  • [PATCH v1 08/23] board: nbxv3: add DPLL status (ZL30733, ZL30643) Vincent Jardin
  • [PATCH v1 09/23] board: nbxv3: enable +3V3_FAN rail fixed regulator Vincent Jardin
  • [PATCH v1 10/23] arm: dts: layerscape: nbxv3: enable UART0..UART3 Vincent Jardin
  • [PATCH v1 12/23] board: nbxv3: store the environment in the boot NOR Vincent Jardin
  • [PATCH v1 13/23] board: nbxv3: enable eMMC on eSDHC2 Vincent Jardin
  • [PATCH v1 11/23] board: nbxv3: enable FlexSPI boot NOR (GD55LB02GF) and FIT boot Vincent Jardin
  • [PATCH v1 14/23] board: nbxv3: enable PCIe root complexes (PCIE3..PCIE6) Vincent Jardin
  • [PATCH v1 15/23] board: nbxv3: enable both USB host controllers Vincent Jardin
  • [PATCH v1 16/23] board: nbxv3: describe the I2C buses and their on module devices Vincent Jardin
  • [PATCH v1 17/23] arm: dts: nbxv3: add the +3V3_FAN regulator Vincent Jardin
  • [PATCH v1 18/23] board: nbxv3: enable JC42 + QorIQ TMU + PMBus thermal Vincent Jardin
  • [PATCH v1 19/23] board: nbxv3: enable HW crypto (CAAM) and rng command Vincent Jardin
  • [PATCH v1 20/23] arm: dts: nbxv3: bump SBSA watchdog timeout to 120s Vincent Jardin
  • [PATCH v1 21/23] board: nbxv3: add operator commands and JTAG semihosting Vincent Jardin
  • [PATCH v1 22/23] board: nbxv3: enable GPIO controllers with line names and hogs Vincent Jardin
  • [PATCH v1 23/23] board: nbxv3: add the boot environment (FIT over MC, MC memory, PS1) Vincent Jardin
  • Re: [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A) Peter Robinson
  • Re: [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A) Vincent Jardin
  • Re: [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A) Peter Robinson
  • Re: [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A) Simon Glass
  • Re: [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A) Peter Robinson
• Trying to get MTD_BLOCK to actually work Mike Looijmans
  • Re: Trying to get MTD_BLOCK to actually work Heinrich Schuchardt
  • Re: Trying to get MTD_BLOCK to actually work Mike Looijmans
• Re: [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS Jorge Ramirez via U-Boot
  • Re: [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS Jorge Ramirez
  • Re: [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS Jorge Ramirez
• Re: [PATCH] iommu: Add RISC-V IOMMU driver Anirudh Srinivasan via U-Boot
  • Re: [PATCH] iommu: Add RISC-V IOMMU driver Tim Ouyang
  • Re: [PATCH] iommu: Add RISC-V IOMMU driver Anirudh Srinivasan
• prep work for submitting Draeger imx6-ralated patches Petko Manolov
  • Re: prep work for submitting Draeger imx6-ralated patches Fabio Estevam
• [PATCH v2 0/8] arm: u8500: Enable upstream DT based SD card boot Linus Walleij
  • [PATCH v2 3/8] mmc: arm_pl180: Set initial supply voltages Linus Walleij
  • Re: [PATCH v2 3/8] mmc: arm_pl180: Set initial supply voltages Stephan Gerhold
  • [PATCH v2 1/8] pinctrl: Add compact Nomadik pin controller Linus Walleij
  • Re: [PATCH v2 1/8] pinctrl: Add compact Nomadik pin controller Stephan Gerhold
  • [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree Linus Walleij
  • Re: [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree Stephan Gerhold
  • Re: [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree Linus Walleij

• Earlier messages
• Later messages