===========
Quadra 950, with a
Seagate ST15050N (narrow) 4Gb HD on SCSI bus 0
2 Seagate ST15050W (wide) 4Gb HD on a JackHammer NuBus card (SCSI bus 2).
The software (loaded on the narrow drive): ================================= Mac OS 8.1. FWB Hard Disk Toolkit 3.0.2
The problem:
==========
Created a RAID 0 (striped) partition using the two wide hd on the JackHammer. On re-start, the machine hangs (no bong, no smiley face, mouse pointer only). If I enable the "enable SCSI start" jumpers, then the machine will boot as normal, but the RAID partion does not mount until I use FWB HDT to mount it. So I think the problem is the striped array interfers with the boot process even though it's not the drive being booted from.
Any ideas? Should I be using the "spindle sync" connection for these drives? How do you do that?
Any help welcome,
john
-- Vintage Macs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
