on 12/1/03 15:18, Harbourmaster at [EMAIL PROTECTED] scribbled: > At 02:14 PM 12/1/2003 -0800, you wrote: >> The hardware: >> =========== >> Quadra 950, with a >> Seagate ST15050N (narrow) 4Gb HD on SCSI bus 0 >> 2 Seagate ST15050W (wide) 4Gb HD on a JackHammer NuBus card (SCSI bus 2). >> >> The software (loaded on the narrow drive): >> ================================= >> Mac OS 8.1. >> FWB Hard Disk Toolkit 3.0.2 >> >> >> The problem: >> ========== >> Created a RAID 0 (striped) partition using the two wide hd on the >> JackHammer. On re-start, the machine hangs (no bong, no smiley face, mouse >> pointer only). > > > A grey screen with only the cursor on boot is a sure sign of a SCSI > termination problem. > > You need to go back and double check your drives for correct SCSI ID's and > correct termination.
Do you have the terminators on the card installed or removed? Are you hooked up to both the 50 pin and 68 pin internal connectors? That is another no-go. You can use one or the other so you'd need to get a 68 to 50 pin converter and put them both on the narrow connection... -- Paul/. 95 black 3000GT VR-4 98 VFR800F, TBR aluminum hi exit formerly reasonable and prudent -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
