On Oct 29, 2007, at 1:06 PM, Jones Beene wrote:
Part 8 is now up on YouTube to answer the objection that the
aluminum pan itself was somehow involved. There is still one wire
to the signal generator - no ground, no fakery.
http://www.youtube.com/watch?v=jn8u8EIJ8Gk
Unbelievable! The "ground" wire is now coming from the oscillator,
not from the termination block under the table. There is no
discussion of the oscillator being turned off. There was no effort
to simultaneously connect the end of the "ground wire" to the pan
either. There is no disconnecting the ground wire and touching the
input lead to show Ron is a "pretty good gound".
The power source for #8 appears to be the oscillator itself. Running
at MHz order frequencies the cross induction in the power lead is
probably plenty to drive that circuit.
Further, regarding the statement in video #8 about the "the
accusations this pan is doing something", what's the explanation for
the power lead under the pan in Fig. 22 of
http://www.drstiffler.com/ce4.asp
This is not an "accusation", those weren't "accusations", this is yet
another direct question.
Horace Heffner
http://www.mtaonline.net/~hheffner/
