I want MikroTik to go back to 48VDC!

Randy Cosby wrote:
http://forum.mikrotik.com/viewtopic.php?f=3&t=36191&start=0

I'm pulling my hair out and wasting all kinds of money on voltage 
regulators to make sure my solar and dc-powered sites don't cause 
mikrotik routerboards to go into over-voltage protection when the 
batteries get charged over 28v.

I'm begging (and asking for you to join me) Mikrotik to:

1. Upgrade the over-voltage protection to 30v or higher on 24 volt products.
2. Never EVER make another routerboard that runs has over-voltage 
protection at 28v
3. Change the over-voltage behavior to cause the device to reboot when 
the voltage drops to acceptable levels, instead of requiring a 
power-cycle to bring it back to life.

Will you join me on this and let Mikrotik, your distributor, etc. know 
your thoughts on this? This is not a new problem, it has been discussed 
repeatedly on the lists and forums.

Thanks!


  


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to