Pfsense appears to have a couple of limitations, e.g. only 1 pptp VPN session to the same server at a time, and only 1 sip session per server, that could cause some problems here. We run pptp VPN all the time sometimes from multiple internal desktops to the same remote customer server (usually our wireless gateway equipment installed at the customer site).
As to what we need it for, it would be our primary gateway router. We're not an ISP, but we do need the flexibility to emulate our IP CCTV and ISP customer setups on-the-fly since we preconfigure our equipment to arrive plug-and-play at their sites. Don't really need squid or load-leveling, but we do need something that will inexpensively and rapidly allow us to add additional hardware and virtual interface ports mapped to various public and private addresses, as well as whatever else comes up, without a big learning curve. GUI is nice but a good CLI would be sufficient. Those requirements (I suspect) rule out cisco and microtik. But anything that runs open-source linux should easily be able to do this. Tom S. ----- Original Message ----- From: "Glenn Kelley" <gl...@hostmedic.com> To: "Tom Sharples" <tsharp...@qorvus.com>; "WISPA General List" <wireless@wispa.org> Sent: Friday, April 02, 2010 9:52 PM Subject: Re: [WISPA] Vyatta? >I love Vyatta. I love PFSense... I love a bunch of other > applications that can do this as well... BUT it might be worth asking > what the job that you want the router to perform. > > While some may bash vYatta - > > Keep in mind - when the reload happened - they specifically did that > for their own Support Contracts ... folks that paid them - but yes - a > major release required a reload. > I can tell horror stories about having to do this w/ Cisco Vax > 7200's 2650's and such as well. IOS updates do not always go as > well as they advertise... > > Why I do like vYatta is the simple fact they provide both the CLI and > GUI - (command line interface and graphical user interface)... > > Here are a few reasons why folks in this board should consider vYatta > community edition: (free) > > 1. Load Balancing > 2. BGP (Full ) > 3. vLAN - do vlans out to the radios > 4. PPPOE - if you wanted to use it > 5. Parental Controls > 6. Speed Control / Traffic Shaping - You can do this right on your > router. > 7. SQUID - cache things vs hitting the web all the time for the same > content (like windows updates, youtubes, etc ) > > > I resell vYatta paid version for those interested - but for most the > community center is just fine. The paid edition will give you all of > the aforementioned with the ability to obtain paid support - and this > is based upon the following: > > 1. what type of contract you have purchased > 2. severity of the request - (ie everything down vs just a feature > request) > > > > > that being said - WHAT ARE YOU TRYING TO DO ? > > If you have a simple setup - and just need full BGP - you might also > want to check out another Open Source Project called PFSense. > > PFSense is full FreeBSD - runs on most any x86 hardware. > I can help any of you with this as well. The PFSense book is a great > place to start - and is written for someone who has never done > routing... > > one last thing about pfsense... Its a full bsd license - you can even > rebrand it. > > I have a bunch of PF systems out in the field as CPE for firewalling > and such - all running under our logo and skin when a client logs in. > a simple 1U rack mount makes that an awesome option - so does a > simple flash drive on a card in a box ... > > Ask questions if I can help either on or off list > > :-) > > Glenn > > > > > -------------------------------------------------------------------------------- Internal Virus Database is out of date. Checked by AVG - www.avg.com Version: 8.5.435 / Virus Database: 271.1.1/2675 - Release Date: 02/08/10 07:35:00 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/