Right. That makes sense. There are some that say that even with a clean fresnel 
going up or down 10 feet can change things. Never understood that. 

> On Apr 10, 2014, at 9:45 AM, LTI - Dennis Burgess <gmsm...@gmail.com> wrote:
> 
> What he wants, is, here is my customer location, how HIGH do I need to go to 
> get an acceptable signal.  If you are going though trees or near a hill, the 
> Fresnel zones include constructive and nonconstructive zones.  sometimes 
> going up 5 feet may help and sometimes it would harm.  These are only in the 
> event that you have Fresnel zone encroachment.  
> 
> 
>> On Thu, Apr 10, 2014 at 8:06 AM, Matt Hoppes <mhop...@indigowireless.com> 
>> wrote:
>> Can you explain this more?  This isn't what I was getting at... but
>> since you brought it up and it's been brought up before it might be
>> worth explaining in more detail.  I'm familiar with the concept but
>> still can't grasp why it works.
>> 
>> 
>> Matt Hoppes
>> Director of Information Technology
>> Indigo Wireless
>> +1 (570) 723-7312
>> 
>> On 4/10/14, 9:04 AM, Brian Webster wrote:
>> > Matt,
>> >
>> >                 Signals do change as you change height as you expose or
>> > conceal the even number Fresnel zones.
>> >
>> >
>> >
>> > Thank You,
>> >
>> > Brian Webster
>> >
>> > www.wirelessmapping.com <http://www.wirelessmapping.com>
>> >
>> > www.Broadband-Mapping.com
>> >
>> >
>> >
>> > *From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
>> > *On Behalf Of *Matt Hoppes
>> > *Sent:* Wednesday, April 09, 2014 3:24 PM
>> > *To:* WISPA General List
>> > *Subject:* Re: [WISPA] Who is using Towercoverage.com ?
>> >
>> >
>> >
>> > Signals don't change as you increment heights. You're asking for real
>> > time foliage mapping. Not going to find it.
>> >
>> >
>> > On Apr 9, 2014, at 3:18 PM, Josh Luthman <j...@imaginenetworksllc.com
>> > <mailto:j...@imaginenetworksllc.com>> wrote:
>> >
>> >     I'm not talking about customers plotting where their address is.
>> >      What I'm getting at is if I have a customer called in, I'd like to
>> >     just punch in the location and then see if they'll work at ground
>> >     level or how high we need to get off the ground and see the signal
>> >     change as I increment height.
>> >
>> >
>> >
>> >     Josh Luthman
>> >     Office: 937-552-2340
>> >     Direct: 937-552-2343
>> >     1100 Wayne St
>> >     Suite 1337
>> >     Troy, OH 45373
>> >
>> >
>> >
>> >     On Wed, Apr 9, 2014 at 3:16 PM, Clay Stewart
>> >     <cstew...@stewartcomputerservices.com
>> >     <mailto:cstew...@stewartcomputerservices.com>> wrote:
>> >
>> >     Josh. You can. Just put the web snip on a website. If need help can
>> >     walk u through later today. Our websire customer lookup...
>> >     http://www.towercoverage.com/iframemc.asp?mcid=1223&Acct=2910
>> >
>> >     On Apr 9, 2014 3:08 PM, "Josh Luthman" <j...@imaginenetworksllc.com
>> >     <mailto:j...@imaginenetworksllc.com>> wrote:
>> >
>> >         I'm having a hard time adjusting to this from Radio Mobile.
>> >          There's all the same "stupid" interface shortfalls, for example
>> >         wanting to know what a customer's CPE would be without adding a
>> >         site and putting them in the same list.  I feel with technology
>> >         as it is, it shouldn't be so convoluted to simply put a dot on a
>> >         map and see what the signal would be from a tower while being
>> >         able to adjust the elevation on the fly.
>> >
>> >
>> >
>> >         I'm wondering if there's another list/forum for this service,
>> >         too.  There's no way I'm going write a bible of questions for
>> >         support, it doesn't make a whole lot of sense for either of us.
>> >
>> >
>> >         Josh Luthman
>> >         Office: 937-552-2340 <tel:937-552-2340>
>> >         Direct: 937-552-2343 <tel:937-552-2343>
>> >         1100 Wayne St
>> >         Suite 1337
>> >         Troy, OH 45373
>> >
>> >
>> >
>> >         _______________________________________________
>> >         Wireless mailing list
>> >         Wireless@wispa.org <mailto:Wireless@wispa.org>
>> >         http://lists.wispa.org/mailman/listinfo/wireless
>> >
>> >
>> >     _______________________________________________
>> >     Wireless mailing list
>> >     Wireless@wispa.org <mailto:Wireless@wispa.org>
>> >     http://lists.wispa.org/mailman/listinfo/wireless
>> >
>> >
>> >
>> >     _______________________________________________
>> >     Wireless mailing list
>> >     Wireless@wispa.org <mailto:Wireless@wispa.org>
>> >     http://lists.wispa.org/mailman/listinfo/wireless
>> >
>> >
>> >
>> > _______________________________________________
>> > Wireless mailing list
>> > Wireless@wispa.org
>> > http://lists.wispa.org/mailman/listinfo/wireless
>> >
>> _______________________________________________
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
> 
> 
> 
> -- 
> 
> Dennis Burgess, Mikrotik Certified Trainer Author of "Learn RouterOS- Second 
> Edition”                                 
>  Link Technologies, Inc -- Mikrotik & WISP Support Services                   
>                                                                  
>  Office: 314-735-0270 Website: http://www.linktechs.net – Skype: linktechs    
>                                                  
>  -- Create Wireless Coverage’s with www.towercoverage.com – 900Mhz – LTE – 3G 
> – 3.65 – TV Whitespace  
> 
> _______________________________________________
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to