Hi Don Clock Meiburg set running good. As I said FT8 is perfect decode FT4 no decodes on a busy band on 14080. 250 QSO's FT4 in WWDIGI !!
Ken.. G0ORH Sent from my iPad > On 4 Sep 2019, at 12:29, Don Hill AA5AU <[email protected]> wrote: > > You didn't mention it and we can't assume but did you check your clock? > > Don AA5AU > > -----Original Message----- > From: Ken Chandler [mailto:[email protected]] > Sent: Wednesday, September 4, 2019 4:25 AM > To: [email protected] > Subject: [wsjt-devel] FT4 no decode > > Hi guys > I hope someone can make sense of this as I've completely lost all decode on > FT4. > > During WWDIGI my log contained 250 odd QSO's all bands, most of those were > on FT4. > On Monday 1st sept, I set up N1MM + WSJT-X for the RSGB trial FT4 contest on > 80m. > I did some tests with a friend on the south coast and decoded ok with 100w. > However afterward others called in and I could not decode them. > During the RSGB trial FT4 contest (one hour duration) the waterfall was full > of stations. > I actually worked G4OGB early on but no other Stn was decoded though I could > see plenty were calling me on the waterfall. > I've reloaded 64bit software on an i7 Nuc, with Microham keyer, K3, with > this setup I've worked a few Thousand QSO's. > > Please note > Running just WSJT-X and FT8 decodes great. > I tried this yesterday on 20m, switching to FT4 14080.00 lots of stn's > active ....no decode!!! > > Regards > > Ken.. G0ORH > > Sent from my iPad > > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
