If Meinberg wasn't working it's probably because you didn't select your
continent from the pulldown during installation.
WIndows time will not work very well in the long run.
de Mike W9MDB
On Friday, September 6, 2019, 12:14:02 PM CDT, Ken Chandler <[email protected]>
wrote:
Hi guys
Seems it was indeed the clock.
So, I've deleted Mienberg and and in w10 pro, I set time as "Internet time".!!
I believe this sync's weekly, I'm hoping if my clock loses sync I can manually
reset on the set time page.
So, at the mo I'm being spotted at between 0-0 and 03 a PY reported 04.
FT4 is now decoding.
Tested with a UA9 and PY plus a few EU stn's.
Thanks for all your advice.
Ken.. G0ORH
Sent from my iPad
> On 6 Sep 2019, at 14:10, Ken Chandler <[email protected]> wrote:
>
> Hi Don
> Clock Meiburg set running good.
> As I said FT8 is perfect decode FT4 no decodes on a busy band on 14080.
> 250 QSO's FT4 in WWDIGI !!
>
> Ken.. G0ORH
>
> Sent from my iPad
>
>
>> On 4 Sep 2019, at 12:29, Don Hill AA5AU <[email protected]> wrote:
>>
>> You didn't mention it and we can't assume but did you check your clock?
>>
>> Don AA5AU
>>
>> -----Original Message-----
>> From: Ken Chandler [mailto:[email protected]]
>> Sent: Wednesday, September 4, 2019 4:25 AM
>> To: [email protected]
>> Subject: [wsjt-devel] FT4 no decode
>>
>> Hi guys
>> I hope someone can make sense of this as I've completely lost all decode on
>> FT4.
>>
>> During WWDIGI my log contained 250 odd QSO's all bands, most of those were
>> on FT4.
>> On Monday 1st sept, I set up N1MM + WSJT-X for the RSGB trial FT4 contest on
>> 80m.
>> I did some tests with a friend on the south coast and decoded ok with 100w.
>> However afterward others called in and I could not decode them.
>> During the RSGB trial FT4 contest (one hour duration) the waterfall was full
>> of stations.
>> I actually worked G4OGB early on but no other Stn was decoded though I could
>> see plenty were calling me on the waterfall.
>> I've reloaded 64bit software on an i7 Nuc, with Microham keyer, K3, with
>> this setup I've worked a few Thousand QSO's.
>>
>> Please note
>> Running just WSJT-X and FT8 decodes great.
>> I tried this yesterday on 20m, switching to FT4 14080.00 lots of stn's
>> active ....no decode!!!
>>
>> Regards
>>
>> Ken.. G0ORH
>>
>> Sent from my iPad
>>
>>
>>
>>
>> _______________________________________________
>> wsjt-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>>
>>
>> _______________________________________________
>> wsjt-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
