Did you turn them on in menuconfig when you built your kernel? -Greg
On Mon, Jun 18, 2018 at 1:40 AM, Ashok kumar <ashokkumar...@gmail.com> wrote: > Hi, > > I have patched xenomai -2.6.4 with linux 3.18.20 . > and installed the patched kernel, and compiled the xenomai library using > below > commands > > cd /usr/src > sudo mkdir build_xenomai-2.6.4 > cd build_xenomai-2.6.4 > > sudo ../xenomai-2.6.4/configure --enable-shared --enable-smp --enable-x86-sep > sudo make -j8 > sudo make install > > in /usr/xenomai/ I am not able to get the modules directory and xenomai > modules > are not available ,xeno_rtdm,xeno_hal,xeno_nucleus. > > I used the below command to load the modules > > sudo modprobe xeno_rtdm, > sudo modprobe xeno_hal > sudo modprobe xeno_nucleus > > but the modules are not getting loaded. > > > is there any modification should be done in the make file, or any > other options should be enabled in the configure options > > kindly help me the get the xenomai modules available. > > > Thank you > R.Ashokkumar > > _______________________________________________ > Xenomai mailing list > Xenomai@xenomai.org > https://xenomai.org/mailman/listinfo/xenomai _______________________________________________ Xenomai mailing list Xenomai@xenomai.org https://xenomai.org/mailman/listinfo/xenomai
