Are you building the RTDM modules? Do you see them getting built in the kernel output.
Please refrain from continuously posting the same question, we will try to help you but it may take some time to respond. -Greg On Tue, Jun 19, 2018 at 5:44 AM, Ashok kumar <ashokkumar...@gmail.com> wrote: > Hi, > > I have turned modules ON, I have attached the enable modules section > in the kernel configuration > > thank you > R.Ashokkumar > > > > On Mon, Jun 18, 2018 at 7:30 PM, Greg Gallagher <g...@embeddedgreg.com> wrote: >> Did you turn them on in menuconfig when you built your kernel? >> >> -Greg >> >> On Mon, Jun 18, 2018 at 1:40 AM, Ashok kumar <ashokkumar...@gmail.com> wrote: >>> Hi, >>> >>> I have patched xenomai -2.6.4 with linux 3.18.20 . >>> and installed the patched kernel, and compiled the xenomai library using >>> below >>> commands >>> >>> cd /usr/src >>> sudo mkdir build_xenomai-2.6.4 >>> cd build_xenomai-2.6.4 >>> >>> sudo ../xenomai-2.6.4/configure --enable-shared --enable-smp >>> --enable-x86-sep >>> sudo make -j8 >>> sudo make install >>> >>> in /usr/xenomai/ I am not able to get the modules directory and xenomai >>> modules >>> are not available ,xeno_rtdm,xeno_hal,xeno_nucleus. >>> >>> I used the below command to load the modules >>> >>> sudo modprobe xeno_rtdm, >>> sudo modprobe xeno_hal >>> sudo modprobe xeno_nucleus >>> >>> but the modules are not getting loaded. >>> >>> >>> is there any modification should be done in the make file, or any >>> other options should be enabled in the configure options >>> >>> kindly help me the get the xenomai modules available. >>> >>> >>> Thank you >>> R.Ashokkumar >>> >>> _______________________________________________ >>> Xenomai mailing list >>> Xenomai@xenomai.org >>> https://xenomai.org/mailman/listinfo/xenomai _______________________________________________ Xenomai mailing list Xenomai@xenomai.org https://xenomai.org/mailman/listinfo/xenomai
