W dniu 04.04.2011 12:44, Fajar A. Nugraha pisze:
On Mon, Apr 4, 2011 at 4:49 PM, For@ll<for...@stalowka.info> wrote:
What can I do that zpool show new value?
zpool set autoexpand=on TEST
zpool set autoexpand=off TEST
-- richard
I tried your suggestion, but no effect.
Did you modify the partition table?
IIRC if you pass a DISK to "zpool create", it would create
partition/slice on it, either with SMI (the default for rpool) or EFI
(the default for other pool). When the disk size changes (like when
you change LUN size on storage node side), you PROBABLY need to resize
the partition/slice as well.
When I test with openindiana b148, simply setting zpool set
autoexpand=on is enough (I tested with Xen, and openinidiana reboot is
required). Again, you might need to set both "autoexpand=on" and
resize partition slice.
As a first step, try choosing c2t1d0 in "format", and see what the
size of this first slice is.
I choosed format and change type to the auto-configure and now I see new
value if I choosed partition -> print, but when I exit from format and
reboot the old value is stay. How I can write new settings?
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
