> > IIRC if you pass a DISK to "zpool create", it would create > > partition/slice on it, either with SMI (the default for rpool) or > > EFI > > (the default for other pool). When the disk size changes (like when > > you change LUN size on storage node side), you PROBABLY need to > > resize > > the partition/slice as well. > > > > When I test with openindiana b148, simply setting zpool set > > autoexpand=on is enough (I tested with Xen, and openinidiana reboot > > is > > required). Again, you might need to set both "autoexpand=on" and > > resize partition slice. > > > > As a first step, try choosing c2t1d0 in "format", and see what the > > size of this first slice is. > > > Hi, > > I choosed format and change type to the auto-configure and now I see > new > value if I choosed partition -> print, but when I exit from format and > reboot the old value is stay. How I can write new settings?
Normally no change should be needed. Can you please paste the output from 'zpool status'? Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
