> LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I'm > changing LUN size on netapp and solaris format see new value but zpool > still have old value. > I tryed zpool export and zpool import but it didn't resolve my > problem. > > bash-3.00# format > Searching for disks...done > > > AVAILABLE DISK SELECTIONS: > 0. c0d1 <DEFAULT cyl 6523 alt 2 hd 255 sec 63> > /pci@0,0/pci-ide@1,1/ide@0/cmdk@1,0 > 1. c2t1d0 <NETAPP-LUN-7340-22.00GB> > /iscsi/d...@0000iqn.1992-08.com.netapp%3Asn.13510595203E9,0 > Specify disk (enter its number): ^C > bash-3.00# zpool list > NAME SIZE ALLOC FREE CAP HEALTH ALTROOT > TEST 9,94G 93K 9,94G 0% ONLINE - > > What can I do that zpool show new value?
Enable autoexpand. If you created a partition or slice on the drive and put the zpool onto that partition or slice, you'll need to change that partition's size. If you just used the whole device, autoexpand should work automatically once enabled (or after a few minutes - see my earlier post). If you can paste the output of 'zpool status', that should show if you're using the whole device or a slice. Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
