To be clear, my internet connection is from a different /24 even though they are both 108.165.x.x. This is not a private email forum.
Thank you, Brett A Mansfield > On Jun 9, 2015, at 8:36 PM, Brett A Mansfield <[email protected]> > wrote: > > The public IPs are not on a VLAN. The subnet is 108.165.x.0/24. > > I currently have eth1-eth7 bridged. Bridge1 is where I have the public IPs. > Bridge1 VLAN 100 is the private IPs of 192.168.100.0/24. I don't use the SFP+ > ports yet. Eth8 is the internet port. It has an IP address of > 108.165.x.246/30. I currently have this confit on an UBNT edgerouter and it > works flawlessly other than the random panics of the OS. The local public > subnet is routed. > > Thank you, > Brett A Mansfield > >> On Jun 9, 2015, at 8:29 PM, Josh Luthman <[email protected]> wrote: >> >> Are the public IPs on the VLAN 100 interface? >> >> Need some configuration here. What are the device's IPs/subnets? What is >> the Mikrotik's LAN/vlan100 IP/subnet? What about WAN? Is the local "LAN" >> public subnet routed to the rest of the world? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >>> On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield >>> <[email protected]> wrote: >>> I am fairly new to Mikrotik and I cannot get it to do what I want. I have >>> the CCR1036-8G-2S+. I have one VLAN using private IPs. It’s VLAN 100. I >>> also have a /24 subnet of public IPs. I have NAT setup for the VLAN >>> because it does need internet access. I have no NAT on the untagged VLAN >>> of public IPs. I can access the net using VLAN 100, but not the public >>> IPs. Anyone else run into this or have any ideas or thoughts? >>> >>> I’ve tried both Static and Dynamic IPs. I have NOT tried to removing the >>> VLAN 100 yet. I will give that a shot later today. I do not have any kind >>> of firewall on here just yet. >>> >>> Thank you, >>> Brett A Mansfield >>> Silver Lake Internet, LLC >>
