I'm happy to send the running config output if there's a command to do so similar to show run on Cisco. I can send it to somebody off list if they're willing to take a look and help me out.
Thank you, Brett A Mansfield > On Jun 9, 2015, at 8:39 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > > Is 192.168.100.1 and 108.165.x.x both on the vlan interface? Or one bridge1 > and one vlan100? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > >> On Tue, Jun 9, 2015 at 10:36 PM, Brett A Mansfield >> <li...@silverlakeinternet.com> wrote: >> The public IPs are not on a VLAN. The subnet is 108.165.x.0/24. >> >> I currently have eth1-eth7 bridged. Bridge1 is where I have the public IPs. >> Bridge1 VLAN 100 is the private IPs of 192.168.100.0/24. I don't use the >> SFP+ ports yet. Eth8 is the internet port. It has an IP address of >> 108.165.x.246/30. I currently have this confit on an UBNT edgerouter and it >> works flawlessly other than the random panics of the OS. The local public >> subnet is routed. >> >> Thank you, >> Brett A Mansfield >> >>> On Jun 9, 2015, at 8:29 PM, Josh Luthman <j...@imaginenetworksllc.com> >>> wrote: >>> >>> Are the public IPs on the VLAN 100 interface? >>> >>> Need some configuration here. What are the device's IPs/subnets? What is >>> the Mikrotik's LAN/vlan100 IP/subnet? What about WAN? Is the local "LAN" >>> public subnet routed to the rest of the world? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>>> On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield >>>> <li...@silverlakeinternet.com> wrote: >>> >>>> I am fairly new to Mikrotik and I cannot get it to do what I want. I have >>>> the CCR1036-8G-2S+. I have one VLAN using private IPs. It’s VLAN 100. I >>>> also have a /24 subnet of public IPs. I have NAT setup for the VLAN >>>> because it does need internet access. I have no NAT on the untagged VLAN >>>> of public IPs. I can access the net using VLAN 100, but not the public >>>> IPs. Anyone else run into this or have any ideas or thoughts? >>>> >>>> I’ve tried both Static and Dynamic IPs. I have NOT tried to removing the >>>> VLAN 100 yet. I will give that a shot later today. I do not have any >>>> kind of firewall on here just yet. >>>> >>>> Thank you, >>>> Brett A Mansfield >>>> Silver Lake Internet, LLC >