Can the devices on publics ping the WAN public? Next hop up? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 9, 2015 11:39 PM, "Brett A Mansfield" <[email protected]> wrote:
> All UBNT. Almost every model XM and XW and a few dozen of their AC line. > > Thank you, > Brett A Mansfield > > On Jun 9, 2015, at 9:31 PM, George Skorup <[email protected]> wrote: > > What radios? > > On 6/9/2015 9:44 PM, Brett A Mansfield wrote: > > The public is on bridge1. VLAN 100 is a layer on top of bridge1. So public > is not tagged and VLAN 100 is, both on bridge1. I have each CPE getting an > IP address on VLAN 100 and bridging the public to the customers router. > > Thank you, > Brett A Mansfield > > On Jun 9, 2015, at 8:39 PM, Josh Luthman <[email protected]> > wrote: > > Is 192.168.100.1 and 108.165.x.x both on the vlan interface? Or one > bridge1 and one vlan100? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Jun 9, 2015 at 10:36 PM, Brett A Mansfield < > [email protected]> wrote: > >> The public IPs are not on a VLAN. The subnet is 108.165.x.0/24. >> >> I currently have eth1-eth7 bridged. Bridge1 is where I have the public >> IPs. Bridge1 VLAN 100 is the private IPs of 192.168.100.0/24. I don't >> use the SFP+ ports yet. Eth8 is the internet port. It has an IP address of >> 108.165.x.246/30. I currently have this confit on an UBNT edgerouter and it >> works flawlessly other than the random panics of the OS. The local public >> subnet is routed. >> >> Thank you, >> Brett A Mansfield >> >> On Jun 9, 2015, at 8:29 PM, Josh Luthman <[email protected]> >> wrote: >> >> Are the public IPs on the VLAN 100 interface? >> >> Need some configuration here. What are the device's IPs/subnets? What >> is the Mikrotik's LAN/vlan100 IP/subnet? What about WAN? Is the local >> "LAN" public subnet routed to the rest of the world? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield < >> [email protected]> wrote: >> >>> I am fairly new to Mikrotik and I cannot get it to do what I want. I >>> have the CCR1036-8G-2S+. I have one VLAN using private IPs. It’s VLAN >>> 100. I also have a /24 subnet of public IPs. I have NAT setup for the >>> VLAN because it does need internet access. I have no NAT on the untagged >>> VLAN of public IPs. I can access the net using VLAN 100, but not the >>> public IPs. Anyone else run into this or have any ideas or thoughts? >>> >>> I’ve tried both Static and Dynamic IPs. I have NOT tried to removing >>> the VLAN 100 yet. I will give that a shot later today. I do not have any >>> kind of firewall on here just yet. >>> >>> Thank you, >>> Brett A Mansfield >>> Silver Lake Internet, LLC >>> >> >> > >
