At this point I haven't even connected the radios. All of my stuff is production on a UBNT edgerouter PRO. This Mikrotik will replace that edgerouter. I'm directly connecting to the Mikrotik with a laptop.
Thank you, Brett A Mansfield > On Jun 9, 2015, at 9:47 PM, George Skorup <[email protected]> wrote: > > Oh, yeah. Maybe there's an upstream router missing a route back to this > router that has the public subnet configured? > >> On 6/9/2015 10:40 PM, Josh Luthman wrote: >> Can the devices on publics ping the WAN public? Next hop up? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >>> On Jun 9, 2015 11:39 PM, "Brett A Mansfield" <[email protected]> >>> wrote: >>> All UBNT. Almost every model XM and XW and a few dozen of their AC line. >>> >>> Thank you, >>> Brett A Mansfield >>> >>> On Jun 9, 2015, at 9:31 PM, George Skorup <[email protected]> wrote: >>> >>>> What radios? >>>> >>>>> On 6/9/2015 9:44 PM, Brett A Mansfield wrote: >>>>> The public is on bridge1. VLAN 100 is a layer on top of bridge1. So >>>>> public is not tagged and VLAN 100 is, both on bridge1. I have each CPE >>>>> getting an IP address on VLAN 100 and bridging the public to the >>>>> customers router. >>>>> >>>>> Thank you, >>>>> Brett A Mansfield >>>>> >>>>> On Jun 9, 2015, at 8:39 PM, Josh Luthman <[email protected]> >>>>> wrote: >>>>> >>>>>> Is 192.168.100.1 and 108.165.x.x both on the vlan interface? Or one >>>>>> bridge1 and one vlan100? >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>>> On Tue, Jun 9, 2015 at 10:36 PM, Brett A Mansfield >>>>>>> <[email protected]> wrote: >>>>>>> The public IPs are not on a VLAN. The subnet is 108.165.x.0/24. >>>>>>> >>>>>>> I currently have eth1-eth7 bridged. Bridge1 is where I have the public >>>>>>> IPs. Bridge1 VLAN 100 is the private IPs of 192.168.100.0/24. I don't >>>>>>> use the SFP+ ports yet. Eth8 is the internet port. It has an IP address >>>>>>> of 108.165.x.246/30. I currently have this confit on an UBNT edgerouter >>>>>>> and it works flawlessly other than the random panics of the OS. The >>>>>>> local public subnet is routed. >>>>>>> >>>>>>> Thank you, >>>>>>> Brett A Mansfield >>>>>>> >>>>>>> On Jun 9, 2015, at 8:29 PM, Josh Luthman <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Are the public IPs on the VLAN 100 interface? >>>>>>>> >>>>>>>> Need some configuration here. What are the device's IPs/subnets? >>>>>>>> What is the Mikrotik's LAN/vlan100 IP/subnet? What about WAN? Is the >>>>>>>> local "LAN" public subnet routed to the rest of the world? >>>>>>>> >>>>>>>> >>>>>>>> Josh Luthman >>>>>>>> Office: 937-552-2340 >>>>>>>> Direct: 937-552-2343 >>>>>>>> 1100 Wayne St >>>>>>>> Suite 1337 >>>>>>>> Troy, OH 45373 >>>>>>>> >>>>>>>> On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield >>>>>>>> <[email protected]> wrote: >>>>>>>>> I am fairly new to Mikrotik and I cannot get it to do what I want. I >>>>>>>>> have the CCR1036-8G-2S+. I have one VLAN using private IPs. It’s >>>>>>>>> VLAN 100. I also have a /24 subnet of public IPs. I have NAT setup >>>>>>>>> for the VLAN because it does need internet access. I have no NAT on >>>>>>>>> the untagged VLAN of public IPs. I can access the net using VLAN >>>>>>>>> 100, but not the public IPs. Anyone else run into this or have any >>>>>>>>> ideas or thoughts? >>>>>>>>> >>>>>>>>> I’ve tried both Static and Dynamic IPs. I have NOT tried to removing >>>>>>>>> the VLAN 100 yet. I will give that a shot later today. I do not >>>>>>>>> have any kind of firewall on here just yet. >>>>>>>>> >>>>>>>>> Thank you, >>>>>>>>> Brett A Mansfield >>>>>>>>> Silver Lake Internet, LLC >
