Oh, yeah. Maybe there's an upstream router missing a route back to this
router that has the public subnet configured?
On 6/9/2015 10:40 PM, Josh Luthman wrote:
Can the devices on publics ping the WAN public? Next hop up?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Jun 9, 2015 11:39 PM, "Brett A Mansfield"
<[email protected] <mailto:[email protected]>>
wrote:
All UBNT. Almost every model XM and XW and a few dozen of their AC
line.
Thank you,
Brett A Mansfield
On Jun 9, 2015, at 9:31 PM, George Skorup <[email protected]
<mailto:[email protected]>> wrote:
What radios?
On 6/9/2015 9:44 PM, Brett A Mansfield wrote:
The public is on bridge1. VLAN 100 is a layer on top of bridge1.
So public is not tagged and VLAN 100 is, both on bridge1. I have
each CPE getting an IP address on VLAN 100 and bridging the
public to the customers router.
Thank you,
Brett A Mansfield
On Jun 9, 2015, at 8:39 PM, Josh Luthman
<[email protected]
<mailto:[email protected]>> wrote:
Is 192.168.100.1 and 108.165.x.x both on the vlan interface?
Or one bridge1 and one vlan100?
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Jun 9, 2015 at 10:36 PM, Brett A Mansfield
<[email protected]
<mailto:[email protected]>> wrote:
The public IPs are not on a VLAN. The subnet is
108.165.x.0/24.
I currently have eth1-eth7 bridged. Bridge1 is where I have
the public IPs. Bridge1 VLAN 100 is the private IPs of
192.168.100.0/24 <http://192.168.100.0/24>. I don't use the
SFP+ ports yet. Eth8 is the internet port. It has an IP
address of 108.165.x.246/30. I currently have this confit
on an UBNT edgerouter and it works flawlessly other than
the random panics of the OS. The local public subnet is routed.
Thank you,
Brett A Mansfield
On Jun 9, 2015, at 8:29 PM, Josh Luthman
<[email protected]
<mailto:[email protected]>> wrote:
Are the public IPs on the VLAN 100 interface?
Need some configuration here. What are the device's
IPs/subnets? What is the Mikrotik's LAN/vlan100
IP/subnet? What about WAN? Is the local "LAN" public
subnet routed to the rest of the world?
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield
<[email protected]
<mailto:[email protected]>> wrote:
I am fairly new to Mikrotik and I cannot get it to do
what I want. I have the CCR1036-8G-2S+. I have one
VLAN using private IPs. It’s VLAN 100. I also have a
/24 subnet of public IPs. I have NAT setup for the
VLAN because it does need internet access. I have no
NAT on the untagged VLAN of public IPs. I can access
the net using VLAN 100, but not the public IPs.
Anyone else run into this or have any ideas or thoughts?
I’ve tried both Static and Dynamic IPs. I have NOT
tried to removing the VLAN 100 yet. I will give that
a shot later today. I do not have any kind of
firewall on here just yet.
Thank you,
Brett A Mansfield
Silver Lake Internet, LLC
