One other thing is that the diplexer is external, and reversible (no
hi/low radio business). So I assume that the two N connectors go to the
diplexer, and perhaps the diplexer has the wave guide on it? I don't
know, I'm just speculating.
bp
<part15sbs{at}gmail{dot}com>
On 6/29/2016 4:49 PM, Eric Kuhnke wrote:
So... It will have four N connectors and four short jumper cables to a
rear feed on a dish? That will be quite a bit more complicated than a
rear wavguide/feed adapter which just has two polarity offset H and V
pol N connectors.
I still don't understand what makes ubnt think they're special and
can't put a radio with a cylindrical waveguide directly on the rear of
a dish, such as with a four-bolt REMEC mount.
Good to hear they are planning on direct DC wiring terminals. Who
wants to bet they successfully put direct -48VDC power capability on
the radio (42 to 56VDC) but don't include an SFP cage?
On Wed, Jun 29, 2016 at 4:31 PM, Rob Genovesi <r...@corp.coastside.net
<mailto:r...@corp.coastside.net>> wrote:
From Gary-UBNT:
"We are working on data sheets right now so hopefully you will get
more questions answered shortly. The reason for N connectors
relates to demand for higher mechanical robustness and the ability
for the connectors to be weather-proof as a stand alone connector
(fully weatherproof gaskets and the ability to accept larger
diameter jumpers readily). The N connectors we use are rated to
18+ GHz."
An active thread on the UBNT forums right now, more available
here:
http://community.ubnt.com/t5/airFiber/Some-AF11X-details/td-p/1512145
-Rob
On Wed, Jun 29, 2016 at 12:05 PM, Bill Prince <part15...@gmail.com
<mailto:part15...@gmail.com>> wrote:
I'm looking at all the other AF-nnX radios from UBNT, and they
all use SMA connectors. What reason would they have to use N
instead of SMA? Seems the SMA connector would have fewer
issues at 11 GHz.